24-31-21
ALL ú ú 01 Page 504 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
STATIC INVERTER - REMOVAL/INSTALLATION
______________________________________
1. General_______
A. This procedure contains two tasks for the static inverter.
(1)
The removal of the static inverter.
(2)
The installation of the static inverter.
B.
The static inverter is on the E3-1 rack in the E/E equipment compartment.
TASK 24-31-31-004-001
2. Static Inverter Removal (Fig. 401)_______________________
A. References
(1)
AMM 20-10-07/201, E/E Rack-Mounted Components
(2)
AMM 20-40-12/201, Electrostatic Discharge Sensitive Devices
(3)
SSM 24-34-11
B.
Access
(1)
Location Zone
205 Electronic Compartment
(2)
Access Panel
1201L Electronic Equipment Access Door
C.
Prepare For Removal
S 864-010
(1)
Open this circuit breaker and install a DO-NOT-CLOSE tag:
(a) C30, Inverter Power, (SSM 24-34-11)
D.
Procedure
S 864-003
(1)
Get access to the static inverter on the E3-1 rack.
(2)
Before you touch the static inverter, refer to (AMM 20-40-12/201).
(3)
Remove the static inverter (AMM 20-10-07/201).
S 024-011
S 024-004
TASK 24-31-31-404-002
3. Static Inverter Installation (Fig. 401)____________________________
A. References
(1) AMM 20-10-07/201, E/E Rack-Mounted Components
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-31-31
ALL ú ú 02 Page 401 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
ELECTRONIC COMPARTMENT ACCESS DOOR
Static Inverter Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-31-31
ALL ú ú 01 Page 402 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(2)
AMM 20-40-12/201, Electrostatic Discharge Sensitive Devices
(3)
AMM 24-22-00/201, Manual Control
(4)
SSM 24-34-11
B.
Access
(1)
Location Zone
205 Electronic Compartment
(2)
Access Panel
1201L Electronic Equipment Access Door
C.
Procedure
S 864-005
(1)
Get access to the E3-1 rack.
S 424-012
(2)
Before you touch the static inverter, refer to (AMM 20-40-12/201).
S 424-006
(3)
Install the static inverter (AMM 20-10-07/201).
S 864-013
(4)
Close this circuit breaker and remove DO-NOT-CLOSE tag:
(a) C30, Inverter Power, (SSM 24-34-11)
S 714-007
(5) Do a test of the static inverter.
(a)
Make sure that the dc and standby power system circuit breakers on the J9, P6-4 , P6-5, and P6-6 panels are closed.
(b)
Supply external power (Ref 24-22-00/201).
(c)
Open the STANDBY POWER AUTO CONT circuit breaker on the P6-5 panel. 1) Make sure that the STANDBY POWER OFF light is off. 2) Make sure that the ac meter switch is in the STBY PWR
position.
a) Make sure that the AC voltmeter shows 115 |5 volts.
b) Make sure that the frequency meter shows 400 |5 Hz.
(d)
Turn the DC meters switch to BAT BUS. 1) Make sure that the DC voltmeter shows 26 |4 volts.
(e)
Close the STANDBY POWER AUTO CONT circuit breaker on the P6-5 panel.
(f)
Open the STBY BUS PWR circuit breaker on the P6-4 panel. 1) Make sure that the ac voltmeter shows zero volts. 2) Make sure that in approximately two seconds the ac
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 電源 ELECTRICAL POWER(151)
