(1)
AMM 28-10-00/201, Fuel Storage
(2)
AMM 28-11-11/401, Wing Fuel Tank Access Panel
(3)
AMM 28-23-00/201, Defueling
(4)
WDM 28-21-01Access
(1)
Location Zones 305 Left Fuel Tank 303 Left Wing Inboard Leading Edge 405 Right Fuel Tank 403 Right Wing Inboard Leading Edge
(2)
Access Panels 7205 Fuel Tank Access Door 7405 Fuel Tank Access Door
Procedure
S 654-032
WARNING: CAREFULLY DO ALL THE SAFETY PROCEDURES TO DEFUEL THE APPLICABLE
_______ TANK AND TO PREPARE TO GO INTO IT. AN EXPLOSION, INJURIES TO PERSONS, AND DAMAGE TO EQUIPMENT CAN OCCUR.
(1)
Do the tasks: "Fuel Tank Defueling" (AMM 28-23-00/201) and "Purging (Air Ventilating)" (AMM 28-10-00/201) to the applicable fuel tank.
S 034-033
(2)
Remove the access panel, No. 3, for the applicable wing fuel tank (AMM 28-11-11/401).
NOTE: The access panel is outboard of the engine.
____
S 014-037
(3)
Do the task: "Shutoff Valve Actuator and Gate Assembly Removal".
S 014-031
(4)
Get access to the shutoff valve through the access panel, No. 3, for the wing fuel tank.
S 034-016
(5)
Remove the bolt which attach the fuel line flanges to the port adapter assembly
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-11
ALL ú ú 01 Page 407 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 024-038
CAUTION:_______DO NOT PERMIT THE ADAPTER ASSEMBLY TO FALL. DAMAGE TO THE WING SKIN OR THE SEAL ON THE FUEL TANK CAN EASILY OCCUR.
(6) Remove the port adapter assembly.
NOTE: Two persons are necessary to do this step.
____
(a)
Put one person in the fuel tank to hold the adapter assembly up.
(b)
Put a second person out of the tank to remove the mounting bolts and the washers that attach the port adapter assembly.
(c)
Remove the mounting bolts and the washers on the port adapter assembly.
(d)
Move the port adapter assembly from between the fuel line flanges.
(e)
Lift the port adapter assembly away from its position on the airplane.
TASK 28-22-11-404-004
5. Shutoff Valve Port Adapter Assembly Installation (Fig. 401)________________________________________________
A. Consumable Materials
(1)
D00057 - Grease, Airplane, High Temperature - MIL-G-3545
(2)
B00316 Cleaning Solvent - Aliphatic Naphtha TT-N-95
B. References
(1)
AMM 12-11-00/301, Fuel Servicing
(2)
AMM 24-22-00/201, Manual Power
(3)
AMM 28-11-11/401, Wing Fuel Tank Access Panel
(4)
WDM 28-21-01
C. Access
(1)
Location Zones
305 Left Fuel Tank
303 Left Wing Inboard Leading Edge
405 Right Fuel Tank
403 Right Wing Inboard Leading Edge
(2)
Access Panels
7205 Fuel Tank Access Door
7405 Fuel Tank Access Door
D. Procedure
S 114-039
(1)
Clean the O-ring grooves and the machined surfaces of fuel line flanges on the port adapter assembly, and front spar with solvent.
(2)
Rub off all remaining solvent with a clean cotton cloth.
S 414-017
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-11
ALL ú ú 01 Page 408 ú Nov 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 434-040
(3) Install new O-rings, lightly lubricated with fuel, into the grooves on the port adapter assembly.
S 424-035 CAUTION: DO NOT LOOSEN THE O-RING OR PUT IT OUT OF ITS CORRECT SHAPE_______
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 燃油 FUEL 2(107)
