E. Remove the Fueling Shutoff Valve
S 034-015
(1)
Hold the fueling shutoff valve and remove the bolts that attach the valve to the fueling manifold.
S 024-016
(2)
Remove the fueling shutoff valve from the fueling manifold.
TASK 28-21-51-404-017
3. Install the Fueling Shutoff Valve (Fig. 401)
_________________________________
A. Consumable Materials
(1) B00316 - Solvent - Aliphatic Naptha TT-N-95
B. References
(1) SWPM 20-20-00, Standard Wiring Practices Manual
C. Access
(1)
Location Zone
402 Right Wing Outboard Leading Edge
(2)
Access Panels
6540 Refueling Station Access Panel
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-21-51
ALL ú ú 01 Page 403 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
D. Prepare the Fueling Shutoff Valve for Installation
S 114-019
(1)
Clean the bolts, washers, and backup rings with solvent.
S 114-018
(2)
Dry it with a lintfree cloth.
S 434-021
(3)
Install the washer and backup rings on the bolts that attach the valve.
S 424-020
(4)
Install a new O-ring, lightly lubricated with fuel, on the bolts.
S 114-022
(5)
Clean the machined surfaces of the manifold and the fueling shutoff valve with solvent.
S 114-023
(6)
Rub the surfaces dry with a lintfree cloth.
S 434-024
(7)
Install a new O-ring, lightly lubricated with fuel, on the fueling shutoff valve.
E. Install the Fueling Shutoff Valve
S 644-035
(1)
Lightly lubricate the shutoff valve O-ring with fuel.
S 424-026
(2)
Put the fueling shutoff valve into the manifold.
S 424-000
CAUTION: DO NOT REMOVE OR HOLD THE O-RING TOO TIGHTLY WHEN YOU TURN THE
_______ FUELING SHUTOFF VALVE. YOU CAN CAUSE DAMAGE TO THE O-RING IF YOU ARE NOT CAREFUL.
(3) Turn the fueling shutoff valve until the bolt holes align with the holes in the manifold.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-21-51
ALL ú ú 01 Page 404 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 644-028
(4) Lightly lubricate the bolt O-rings with fuel.
S 424-029
(5) Install the bolts.
S 424-030
(6) Tighten all the bolts equally.
S 424-031
(7) Connect the bonding jumper to the fueling shutoff valve.
S 424-034
(8) Connect the electrical plug to the fueling shutoff valve.
S 424-032
(9) Measure the electrical bond between the fueling shutoff valve and
the structure (SWPM 20-20-00).
NOTE:____ The resistance must not be more than 0.0010 ohm.
S 414-033
(10)
Close the access door, 6540, for the refuel station.
S 864-036
(11)
Close these circuit breakers and remove the DO-NOT-CLOSE tags:
(a) P6 Main Power Distribution Panel 1) EP GND FUELING 2) QTY
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-21-51
ALL ú ú 01 Page 405 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
FUELING FLOAT SWITCH - REMOVAL/INSTALLATION
___________________________________________
1. General_______
A. This procedure has two tasks:
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 2(47)
