Fuel Pump Flame Arrestor Inspection
Figure 401A (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-41
ALL ú ú 02 Page 405 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
H88783
A 737-300/400/500MAINTENANCE MANUAL
BOOST PUMP CONNECTIONS
(PUMP REMOVED FROM AIRPLANE)
FUEL PUMP FLAME ARRESTOR
(BREATHER PLUG)
Fuel Pump Flame Arrestor Inspection
Figure 401A (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-41
ALL ú ú 01 Page 406 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
H88791
A 737-300/400/500MAINTENANCE MANUAL
(b) Turn the clamps out of the opening to give sufficient space to get the flange on the fuel boost pump out of the opening.
NOTE: If the clamps do not move freely, use more force to
____ move them. It is not usually necessary to loosen the shoulder bolt in the top end of the clamp.
S 024-018
(6) Remove the fuel boost pump.
NOTE: The O-rings on the connections of the fuel boost pump
____ have the function of seals with the mating surfaces. Thus, it is necessary to use more than the usual force to pull the fuel boost pump from its connections.
(a)
Pull the fuel boost pump away from the mounting plate in a straight line until it is free of the mounting plate.
(b)
For the aft boost pumps in the wing tanks and for the boost pumps in the center tank, lower the pump through the access opening.
(c)
For the forward boost pumps in the wing tank, carefully move the fuel boost pump out of the airplane between the front spar and the leading edge flap.
TASK 28-22-41-404-019
3. Fuel Boost Pump Installation
____________________________
A. Special Tools and Equipment
(1)
C28010-1 (recommended) - priming bottle
(2)
F80203-1 or equivalent (alternative) - priming bottle
B. Standard Tools and Equipment
(1) Container - to catch fuel
C. Consumable Materials
(1) B00316 - Aliphatic Naphtha, TT-N-95, cleaning solvent
D. References
(1)
AMM 20-10-34/701, Metal Surfaces
(2)
SWPM 20-20-00, Standard Wiring Practices Manual
(3)
AMM 24-22-00/201, Manual Control
(4)
AMM 27-81-00/201, Leading Edge Flaps
(5)
AMM 57-30-11/401, Fuel Boost Pump Access Panels
E. Access
(1) Location Zone
221 Center Section Fuel Tank
303 Left Wing Inboard Leading Edge
305 Left Fuel Tank
403 Right Wing Inboard Leading Edge
405 Right Fuel Tank
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-41
ALL ú ú 02 Page 407 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(2) Access Panels
7201 Boost Pump Access Door
7203 Boost Pump Access Door
7401 Boost Pump Access Door
7403 Boost Pump Access Door
F. Examine the Fuel Boost Pump
S 564-020
WARNING:_______DO NOT INSTALL THE INCORRECT FUEL BOOST PUMP. THE ENGINE POWER CAN DECREASE SUDDENLY OR AN ENGINE FLAMEOUT CAN OCCUR.
(1) Examine the part number on the fuel boost pump that you are
scheduled to install.
(a) If the airplane uses the JET-B/JP-4 types of fuel, do not install the fuel boost pump with the part number 10-60533.
NOTE: The engine power can decrease suddenly if you
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 2(138)
