(c)  
Make sure the position indication light goes off when the valve is fully open.

 (d)  
Examine the position of the manual override lever on the engine shutoff valve (Fig. 502).

 (e)  
Make sure the engine shutoff valve is fully open.

 (f)  
Make sure the engine shutoff valve for the other engine and the crossfeed valve did not open during this step.

 (g)  
Make sure the engine shutoff valve stays fully open while you slowly move the start lever forward to the IDLE position.

 NOTE: If the engine shutoff valve operates correctly, it
____ is closed when the start lever is in the CUTOFF position. It opens when the start lever is 0.25 to 1.80 inches from the CUTOFF position. It stays open at all positions thru the IDLE position.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 02 Page 503 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 715-011
 (6)  Make sure the engine shutoff valve operates correctly with the fire switch for the applicable engine.
 (a)  
Find the fire switch for the applicable engine on the P8 panel (on the aisle stand).

 (b)  
Pull the applicable fire switch to the FIRE position.

 (c)  
Make sure the position indication light for the applicable engine shutoff valve shows these effects: 1) The light comes on brightly to show a change in the valve

 position. 2) The light stays on dimly to show that the valve is closed.

 (d)  
Examine the position of the manual override lever on the valve to make sure the engine shutoff valve is closed (Fig. 502).

 (e)  
Push the fire switch for the applicable engine to the NORMAL position.

 (f)  
Make sure the position indication light for the applicable engine shutoff valve shows these effects: 1) The light comes on brightly to show the position change of

 the engine shutoff valve. 2) The position indication light goes off to show the engine shutoff valve is open.

 (g)  
Examine the position of the manual override lever on the engine shutoff valve to make sure the valve is open (FIg. 502).

 S 715-012
 (7)  Make sure the engine shutoff valve operates correctly while the engines stop.
 (a)  
Put the start lever for the applicable engine back to the CUTOFF position.

 (b)  
Make sure the position indication light for the engine shutoff valve shows these effects: 1) The light comes on brightly to show the position change of

 the engine shutoff valve. 2) The light stays on dimly to show the engine shutoff valve is fully closed.

 (c)  
Examine the position of the manual override lever on the valve to make sure the valve is fully closed.

 S 715-013
 (8)  Set the BAT switch on the P5 panel to the OFF position.
 (a)  Make sure the position indication lights for the position of the engine shutoff valves go off.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-00
 ALL  ú ú 01 Page 504 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 F. Put the Airplane Back to Its Usual Condition
 S 415-014
 (1)  
Close the access doors, 6212 and 6512, for the engine shutoff valves.

 S 865-015

 (2)
Close these circuit breakers and remove the DO-NOT-CLOSE tags:

 (a)  P6 Main Power Distribution Panel
 1) ENGINE NO. 1 RIGHT IGNITION
 2) ENGINE NO. 1 LEFT IGNITION
 3) ENGINE NO. 2 RIGHT IGNITION
 4) ENGINE NO. 2 LEFT IGNITION
 5) SHUTOFF VALVE ENG 1
 6) SHUTOFF VALVE ENG 2
 7) INDICATOR MASTER DIM BUS

 S 865-016
 (3)  Remove the electrical power if it is not necessary for other tasks (AMM 24-22-00/201).
 TASK 28-22-00-715-018
 3.  Fuel Crossfeed Valve Test_________________________
 A. References
 (1)  AMM 24-22-00/201, Manual Control
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 2(78)