28-13-31
ARRESTER ú
ú 02 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 402Nov 12/01
A 737-300/400/500MAINTENANCE MANUAL
BOLT WASHER FLAME ARRESTER
FAY SURFACE SEAL, BMS 5-26
A
A-A
Air Vent Scoop Flame Arrester Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH THE SURGE TANK FLAME ú
28-13-31
ARRESTER ú ú 02 Page 403 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(c)
Put a rope around the outboard section of the wing and attach signs that you can see clearly that show DANGER - OPEN FUEL TANKS.
(d)
Make sure there is no remaining fuel in the surge tank. 1) Open the sump drain valve for the surge tank. 2) Let the remaining fuel flow into the container.
S 014-004
(3)
Remove the access panel (7102 or 7502) for the air vent scoop (AMM 28-11-11/401).
S 144-021
(4)
With the sealant tools, remove the sealant from the heads of the four bolts that attach the vent scoop to the access door.
S 024-020
(5)
Loosen and remove the four bolts that attach the vent scoop to the access door.
S 024-019
(6)
Remove the vent scoop.
S 024-022
(7)
Remove the flame arrester from its position in the access door.
TASK 28-13-31-404-007
3. Flame Arrester Installation (Fig. 401)___________________________
A. Special Tools and Equipment
(1) T477W - Bonding Meter, Avtron Manufacturing Co., Cleveland, OH
B. Standard Tools and Equipment
(1)
Tools - sealant removal, cutting, and fairing
(2)
Gun - sealing, or tube, for applying fillet sealant material
(3)
Brush - paint, small
C. Consumable Materials
(1)
A00701 - Sealant, BMS 5-26, Type II, Class A
(2)
A00702 - Sealant, BMS 5-26, Type II, Class B
(3)
B00148 - solvent, methyl ethyl ketone (MEK), TT-M-261
D. References
(1)
AMM 20-22-01/601, Electrical Bonding
(2)
AMM 28-11-00/801, Integral Fuel Tanks
(3)
AMM 28-11-11/401, Wing Fuel Tank Access Panels
(4)
AMM 28-13-31/701, Air Vent Scoop Flame Arrester
E. Access
(1) Location Zones
304 Left Fuel Vent Surge Tank
404 Right Fuel Vent Surge Tank
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH THE SURGE TANK FLAME ú
28-13-31
ARRESTER ú
ú 01 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 404Jul 12/99
A
737-300/400/500MAINTENANCE MANUAL
(2) Access Panels
7102 Surge Tank Vent Scoop Door
7502 Surge Tank Vent Scoop Door
F. Procedure
S 114-008
WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
(1)
Remove the remaining sealant and fully clean the mounting flanges with a clean, lintfree cloth moist with solvent, Series 95 (AMM 20-30-95/201).
S 214-010
(2)
Make sure the cells of the flame arrester are not blocked to airflow.
(a) Clean the flame arrester if it is necessary (AMM 28-13-31/701).
S 424-024
(3) Install the flame arrester in its position on the flange of the door assembly.
(a)
Insert the four bolts that attach the vent scoop to the door assembly.
(b)
Tighten the four bolts to the applicable standard torque (AMM 20-50-11/201).
S 394-023
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 2(8)
