EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-18-11
 ALL  ú ú 01 Page 404 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 RESERVOIR FILL FILTER MODULE - MAINTENANCE PRACTICES
____________________________________________________
 1.  General_______
 A.  There are four tasks in this procedure. The first task is the removal of the reservoir fill filter module. The second task is the installation of the reservoir fill filter module. The third task is the removal of the reservoir fill filter. The fourth task is the installation of the reservoir fill filter.
 TASK 29-18-21-002-002
 2.  Reservoir Fill Filter Module Removal (Fig. 201)____________________________________
 A.  Standard Tools and Equipment
 (1)  Container to catch hydraulic fluid
 B.  References
 (1)  12-40-00/201, Cleaning and Washing
 C.  Access
 (1)  Location Zone
 217 Main Wheel Well, RH

 D.  Procedure
 S 862-004
 (1)
Put the reservoir fill selector valve to the CLOSED position.

 S 032-003

 (2)  
Disconnect hydraulic lines from the inlet and outlet ports of the filter.

 S 682-009

 (3)  
Drain hydraulic fluid into a container.

 S 162-010

 (4)  
Clean all hydraulic fluid from the installation area if it is necessary (Ref 12-40-00/201).

 (5)  
Install caps on the hydraulic lines.

 (6)  
Install plugs in the filter ports.

 (7)  
Remove the mounting bolts.

 (8)  
Remove the filter module.

 S 432-005
 S 432-006
 S 032-007
 S 022-008
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-18-21
 ALL  ú ú 01 Page 201 ú Jul 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500
MAINTENANCE MANUAL

RESERVOIR FILL FILTER MODULE
SEE A
RESERVOIR FILL
SELECTOR VALVE

RESERVOIR FILL FILTER MODULE
SEE B RESERVOIR MANUAL FILL PUMP
MOUNTING
BOLTS
PRESSURE FILL
UNION CONNECTION
O-RING
(2 LOCATIONS)

FWD
RESERVOIR FILL FILTER MODULE A
Reservoir Fill Filter Module Figure 201 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-18-21
 ALL  ú ú 01 Page 202 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
FILTER HEAD
IN OUT
BACKUP RING
RESERVOIR FILL FILTER MODULE

B

Reservoir Fill Filter Module
Figure 201 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-18-21
 ALL  ú ú 01 Page 203 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 TASK 29-18-21-402-001
 3.  Reservoir Fill Filter Module Installation (Fig. 201)_________________________________________
 A. Consumable Materials
 (1)  
D00567 Skydrol Assembly Lube - MCS 352

 (2)  
D00568 Fluid - Hydraulic, BMS 3-11

 B. References
 (1)  12-12-00/301, Hydraulic Reservoir
 C. Access
 (1)  Location Zone
 217 Main Wheel Well, RH

 D. Procedure
 S 642-026
 (1)  
Apply assembly lube or hydraulic fluid to the O-rings and the unions.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 液壓 HYDRAULIC POWER(130)