S 024-020
 (3)  Remove the transformer.
 (a)  
Disconnect the electrical wires from the terminals of the transformer.

 (b)  
Remove the mounting nuts and the transformer.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH LOGO LIGHTS ú

 33-49-21
 ú ú 01 Page 401 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

LOGO LIGHTS TRANSFORMER
TERMINAL (3 LOCATIONS)
WINDOW
Logo Lights Transformer
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH LOGO LIGHTS ú

 33-49-21
 ú ú 02 Page 402 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
B02306
A
737-300/400/500MAINTENANCE MANUAL
 TASK 33-49-21-404-022
 3.  Logo Light Transformer Installation (Fig. 401)___________________________________
 A. Standard Tools and Equipment
 (1)  Spatula
 B. Consumable Materials
 (1)  A00230 Compound - Sealing and Insulation, BMS 5-37, Class B
 C. References
 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 57-21-11/401, Removable Wing Tip

 (3)  
SSM 33-40-02

 (4)  
WDM 33-49-01

 D. Access
 (1)  Location Zone
 301 Left Wing Tip
 401 Right Wing Tip

 E. Procedure
 S 424-023
 (1)  Install the transformer.
 (a)  
Hold the transformer in its position and install the mounting nuts.

 (b)  
Connect the electrical wires to the terminals.

 WARNING: MAKE SURE YOU USE THE COMPOUND TO SEAL EACH BARE
_______ ELECTRICAL CONNECTION NEAR THE LIGHT. THIS WILL PREVENT AN EXPLOSION OF FUEL FUMES. AN EXPLOSION CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (c)  Use the spatula to apply a layer of the compound on the electrical terminals.
 S 714-026
 (2)  Do a test of the transformer.
 (a)  Supply electrical power (AMM 24-22-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH LOGO LIGHTS ú

 33-49-21
 ú ú 01 Page 403 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (b)  
Remove each DO-NOT-CLOSE or DO-NOT-OPERATE tag. 1) Close each circuit breaker that was opened.

 (c)  
Set the switch to the on position. 1) Make sure the logo lights come on correctly.

 (d)  
Set the switch to the off position.
 1) Make sure the logo lights go off.

 (e)  
Remove electrical power if it is not necessary (AMM 24-22-00/201)

 S 414-027
 (3)  
Install the fairings (AMM 57-21-11/401).

 S 414-028

 (4)  
Install the access panel.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH LOGO LIGHTS ú

 33-49-21
 ú ú 01 Page 404 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 EMERGENCY LIGHTS - DESCRIPTION AND OPERATION
____________________________________________
 1.  General_______
 A.  The emergency lights automatically supply lighting and identify the exits, if the airplane has an electrical power failure. In this condition, the emergency lighting replaces the usual lighting. The flight crew and passenger compartment attendants can also operate the emergency lights and signs manually with switches. Electrical power is supplied to the emergency lighting system by 6 volt battery operated power supplies, independently from airplane generator and battery busses.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燈 LIGHTS(94)