34-62-01
 ú ú 08 Page 523 ú Jul 12/00

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 285-064
 (15) Do the Program Pin Verification:
 (a) Push the PREV PAGE key on CDU to show the FMCS ANALOG DISC 2/4
 (b)  page.Make sure the outputs on the CDU display are the same as the outputs shown below:
 ASSUMED TEMP CAA FLT RULES KILOGRAM OPTION MAG/TRUE OMEGA SRCE/DEST IDENT ASPIRATED TAT FRQ SCAN DME °C/°F DEFAULT EFIS INSTALLED  ENABLEDISABLEENABLEMAGOFFLEFTENABLEDISABLE°CON
 NOTE:____ AIRPLANES WITH DUAL FMC; The SOURCE/DEST IDENT line will show RIGHT when you do a test of the right FMC.
 (c) (d)  Push the NEXT PAGE key on the CDU front panel to show the FMCS ANALOG DISC 3/4 page.Make sure the outputs on the CDU display are the same as the outputs shown below:
 VMO/MMO MAINT TEST  340/.82DISABLE
 NOTE:____ AIRPLANES WITH SOFTWARE UPDATE 7 AND ON; MAINT TEST is removed.
 (e) (f)  Push the NEXT PAGE key on the CDU front panel to show the FMCS ANALOG DISC 4/4 page.Make sure the outputs on the CDU display are the same as the outputs shown below:

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 34-62-01

 ú ú 09 Page 524 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 VOR INHIBIT DISABLE FLIGHT NUMBER DISABLE TOGA RW POS UPD ENABLE TAKEOFF PROFILE DISABLE TAKEOFF SPEEDS DISABLE NAVAID SUPPRESS DISABLE SEL CRS INHIBIT DISABLE ACARS INSTALLED OFF
 S 865-065
 (16) Push the line select key (LSK) adjacent to <INDEX (6L) to show FMCS BITE 1/1 page.
 F. Performance (PERF) Factors - Verification/Adjustment
 S 715-018
 (1)  
Do the prepare for test in this task: "Operational Test - FMCS" if it is necessary.

 S 865-019

 (2)  
Make sure the CDU display shows the FMCS BITE 1/1 page.

 S 865-020

 (3)  
If the CDU display does not show the FMCS BITE 1/1 page, do these steps:

 (a)  
Push the CDU INIT REF key to show the POS INIT or PERF INIT page.

 (b)  
Push the LSK adjacent to <INDEX.

 (c)  
Push the LSK adjacent to MAINT>.

 (d)  
Push the LSK adjacent to <FMCS.

 S 865-143
 (4)  AIRPLANES WITH DUAL FMC;
 Push the LSK adjacent to LEFT FMC.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 34-62-01
 ú ú 10 Page 525 ú Jul 15/98

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (5)  S 865-021Push the LSK adjacent to (PERF FACTR>) to show the PERF FACTORS 1/1 page.
 (6)  S 865-194AIRPLANES WITH FMC P/N 10-62044-001 THRU -301(SOFTWARE UPDATE 0-4); The option code is not shown.
 (7)  S 865-195AIRPLANES WITH FMC P/N 10-62044-401 (SOFTWARE UPDATE 5 AND 6); Do the option code verification:
 NOTE:  The PERF FACTORS page shows the option code. This option code is an eight-digit number. For example, 00000001 is the option code for the High Idle Descent option enabled.
 CAUTION:_______ MAKE SURE THAT YOU HAVE THE CORRECT VALUE BEFORE YOU CHANGE THE OPTION CODE. YOU CAN GET THE CORRECT VALUE OF THE OPTION CODE FROM THE APPLICABLE AIRLINE DEPARTMENT.
 (a)  BEJ 061, 062, 101-112; Make sure the option code number is 00000001.
 (8)  S 865-193AIRPLANES WITH FMC P/N 10-62225-001 (SOFTWARE UPDATE 7) AND ON; Do the option code verification.
 NOTE:  The PERF FACTORS page shows the option code. The code is a twelve-digit hexadecimal number. For example, 000000000001 is the option code for the High Idle Descent option enabled.
 CAUTION:_______ MAKE SURE THAT YOU HAVE THE CORRECT VALUE BEFORE YOU DO THE CHANGE FOR THE OPTION CODE. YOU CAN GET THE CORRECT VALUE OF THE OPTION CODE FROM THE APPLICABLE AIRLINE DEPARTMENT.
 (a)  BEJ 113; Make sure the option code number is 0000000003C1.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 5(106)