(d)
Dry the surfaces with a vacuum source.
S 432-003
(4) Install the CDU (Ref 34-62-11/401).
TASK 34-62-11-102-005
3. FMCS CDU Display Cleaning_________________________
A. Consumable Material
(1)
Cloth - Clean lint-free Wiping
(2)
Cleaner - Glass, Windows, and Mirror (Ref 20-30-31/201)
B. Reference
(1) 20-30-31/201, Cleaners and Polishes
C. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
D. Procedure
S 142-025
(1) Clean the FMCS CDU display:
(a)
Remove dust and dirt with a vacuum source.
(b)
Remove the surface grease and dirt from the CDU display with a cloth moist with glass cleaner.
(c)
Dry and polish the CDU display with cloth.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-62-11
ALL ú ú 01 Page 203 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 34-62-11-002-009
4. FMCS CDU Keyboard Removal
_________________________
A. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
B. Procedure
S 862-010
(1) Open this circuit breaker and attach DO-NOT-CLOSE tag:
(a) P18 Panel
1) FMCS CDU No. 1
NOTE: On airplanes with provisions for dual FMC, FMCS CDU
____ (ANCDU, MCDU) No. 2 circuit breaker will be on the P6-1 panel.
S 022-012
(2) Remove the keyboard:
(a)
Remove the six captive screws that hold the keyboard to the mounting plate.
(b)
Carefully move the keyboard from the mounting plate to get access to connector J3 and P3 behind the keyboard.
(c)
Remove the two captive screws that hold connector J3 to P3.
(d)
Disconnect the connector J3 from the keyboard connector P3.
(e)
Put a cover on the connector J3 and cable to prevent damage.
TASK 34-62-11-402-013
5. FMCS CDU Keyboard Installation
______________________________
A. Reference
(1) 24-22-00/201, Manual Control
B. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
C. Procedure
S 422-014
(1) Install the keyboard
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-62-11
ALL ú ú 17 Page 204 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
NOTE: Make sure you install a keyboard with the same part number as
____
the one you removed.
(a)
Make sure the gasket is correctly aligned.
(b)
Connect the connector J3 to the keyboard connector P3.
(c)
Install the two captive screws which attach the connector J3 to P3.
(d)
Install the six captive screws that hold the keyboard to the mounting plate.
S 862-015
(2) Remove the DO-NOT-CLOSE tag and close this circuit breaker:
(a) P18 Panel
1) FMCS CDU No. 1.
NOTE: On airplanes with provisions for dual FMC, FMCS CDU
____ (ANCDU, MCDU) No. 2 circuit breaker will be on the P6-1 panel.
D. Keyboard Test
S 862-017
(1) Prepare for the keyboard test:
(a)
Supply electrical power (Ref 24-22-00/201).
(b)
Make sure that the BAT switch on the Pilot's Forward Overhead Panel is in the ON position.
(c)
Set the STANDBY POWER switch on the Pilot's Forward Overhead Panel to the AUTO position.
(d)
Make sure that these circuit breakers are closed:
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 5(111)
