S 014-011

 (2)  
Open the cargo compartment door (AMM 52-34-00/001).

 S 864-012
 WARNING: USE CARE WHEN WORKING NEAR THE OPENING OF THE CARGO COMPARTMENT
_______ DOOR. INSTALL A SAFETY BARRIER, IF IT IS NECESSARY. INJURY TO PERSONS CAN OCCUR IF THEY FALL THROUGH THE OPENING OF THE DOOR.
 (3)  
Push the CAUTION switch-light on the cargo control panel until it starts to flash.

 S 864-013

 (4)  
Make sure the POWER DRIVE SYSTEM switch on the cargo control panel is in the OFF position.

 S 864-014

 (5)  
Open the circuit breaker, and attach DO-NOT-CLOSE tags, for the applicable PDU.

 (a)  
For the forward compartment, the circuit breaker is on the P86 Forward Lower Cargo Equipment Panel.

 (b)  
For the aft compartment, the circuit breaker is on the P59 Aft Lower Cargo Equipment Panel.

 B. Install the PDU
 S 424-015
 (1)  Install grounding strap onto grounding stud of ballmat or roller tray, as applicable.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-53-01
 ALL  ú ú 01A Page 402 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 214-016
 (2)  
Locate PDU in ballmat pan or roller tray, so that connector end is towards the connector hole in ballmat or roller tray.

 S 424-017

 (3)  
Install attach screws and reconnect grounding strap. Ensure that two washers are used for grounding strap connection.

 S 424-018

 (4)  
Reconnect electrical connector.

 C. Do an operational test of the PDU
 S 864-019
 (1)  Close the circuit breaker, and remove DO-NOT-CLOSE tags, for the applicable PDU.
 (a)  
For the forward compartment, the circuit breaker is on the P86 Forward Lower Cargo Equipment Panel.

 (b)  
For the aft compartment, the circuit breaker is on the P59 Aft Lower Cargo Equipment Panel.

 S 864-020
 (2)  
Set the POWER DRIVE SYSTEM switch on the cargo control panel to operate the applicable PDU.

 S 864-021

 (3)  
Push the CAUTION switch-light on the cargo control panel until it stops flashing.

 S 864-022

 (4)  
Put a piece of paper, or equivalent cover, over the sensor of the applicable PDU and move the joystick in the direction required to operate the PDU.

 (a)  The PDU should raise up and the drive rollers should rotate in the direction that the joystick is moved.
 S 824-023
 (5)  
Release the joystick

 (a)  The PDU drive rollers should stop and the PDU should retract into its normal position.

 (6)  
Remove the cover from PDU sensor.

 S 024-024
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-53-01
 ALL  ú ú 01A Page 403 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 D. Put the airplane back to its usual condition
 S 864-025
 (1)  
Put the POWER DRIVE SYSTEM switch on the cargo control panel to the OFF position.

 S 414-026

 (2)  
Close the cargo compartment door (AMM 52-34-00/001).

 S 864-027

 (3)
Remove electrical power if it is not necessary (AMM 24-22-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-53-01
 ALL  ú ú 01A Page 404 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

STRAP BONDING  (4 LOCATIONS) SCREW 
POWER DRIVE UNIT 

BALLMAT
PDU INSTALLATION - BALLMAT
SCREW (4 LOCATIONS)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 1(142)