NOTE: On some airplanes, a stowage box may block the installation
____ of some screws. To install these screws, lift the lid of the stowage box for access.
 S 434-016
 (5)  
Install the spline gap covers on each side of the window reveal panel.

 S 724-017

 (6)  
After you install the reveal panel, make sure you can lift and lower the window shade with a maximum force of 7 pounds.

 S 434-018

 (7)  
Connect the external electrical connector to the light assembly housing on the outboard side of the reveal panel.

 S 864-019

 (8)  
Remove the DO-NOT-CLOSE tag and close this circuit breaker:

 (a)  P414 Main Power Distribution Center - Left Panel 1) 414L17 UPR WNDW REVEAL

 (9)  
Install the ceiling panel (AMM 25-22-03/401).

 (10)
 Do a test of the sidewall light assembly (AMM 33-28-00/501).

 S 414-020
 S 714-021
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-21-02
 ALL  ú ú 02A Page 406 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 SIDEWALL AND CEILING INSULATION - REMOVAL/INSTALLATION
______________________________________________________
 1.  General_______
 A.  This procedure contains two tasks which are to remove and install the insulation blankets and cap strips. These blankets are installed between the sidewall and the ceiling structure. The instructions in this procedure are an example for all insulation blankets on the airplane.
 B.  Remove the blankets if they are torn or damaged, or if it is necessary to examine the airplane structure.
 C.  A part number for each blanket is identified with a stamp on the inboard side of the blanket. Install each blanket with the part number inboard to make sure you install it correctly.
 D.  If it is necessary to remove many blankets, identify each blanket with tag to show its location. Also, keep the fasteners for each blanket with the blanket to make the installation of the blankets easier.
 E.  If you want to repair the insulation blankets, refer to 25-00-00/801, Equipment and Furnishings.
 TASK 25-21-04-004-001
 2.  Remove the Insulation Blanket (Fig. 401)_____________________________
 A.  References
 (1)  
25-21-02/401, Upper Deck Window Reveal

 (2)  
25-22-03/401, Upper Deck Ceiling Panels

 (3)  
IPC 25-21-04

 B.  Access
 (1)  Location Zone
 200 Upper-Half Fuselage

 C.  Procedure
 S 844-019
 (1)  
Refer to 20-09-01/201, Floor Panel Protection, to prevent damage to the floor panels before you do this procedure.

 S 014-023

 (2)  
Remove the side lining panel of the window (AMM 25-21-02/401) to get access to the insulation blankets.

 S 014-003

 (3)  
To get access to the insulation blankets installed on the upper deck, remove these components:

 (a) The upper deck ceiling panel (AMM 25-22-03/401)
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-21-04
 ALL  ú ú 08 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

INSULATION BLANKET

Insulation Installation - Example
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-21-04
 ALL  ú ú 02 Page 402 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
D17741
A
747-400
MAINTENANCE MANUAL

STRINGER
CAP STRIP
CLIP 
INSULATION 
BLANKET 
BLANKET  BLANKET 
ASSEMBLY  TAB 
STRUCTURE  SEE  B 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 1(60)