B. Procedure
 S 424-011
 (1)  
Put the slider-brackets on the curved-track.

 S 424-016

 (2)  
Install the screws to attach the slider-brackets to the curved-track.

 S 424-012

 (3)  
Attach the sunvisor-holder to the slider-brackets with two screws.

 S 424-015

 (4)
Install the curved-track to the ceiling panel with screws.

 S 424-013

 (5)  
Install the sunvisor in the sunvisor-holder.

 S 714-014

 (6)  
Move the sunvisor along the curved-track to make sure it moves freely.

 NOTE: Make sure you tighten the slider-bracket screws
____ sufficiently to hold the sunvisor in position.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-13-03
 ALL  ú ú 01 Page 403 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 SUNVISORS - PILOTS' - ADJUSTMENT/TEST
_____________________________________
 1.  General
_______
 A.  This procedure is a task to adjust the sunvisor in the flight
 compartment.

 TASK 25-13-03-825-001
 2.  Sunvisor Adjustment (Fig. 501)
___________________
 A.  Access
 (1)  Location Zones
 221/222 Control Cabin

 B.  Procedure
 S 715-002
 (1)
Make sure the sunvisor moves along the sunvisor track freely.

 S 715-003

 (2)
Make sure the sunvisor stays in a position that you set.

 S 425-004

 (3)  
If the sunvisor does not stay in a position that you set, tighten the screws on the slider brackets.

 NOTE: Tightening the screws will increase the friction of the
____ spindles, thus permit the sunvisor to stay in the set position.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-13-03
 ALL  ú ú 01 Page 501 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SUNVISOR 
TRACK 
SEE  A 
UPPER SILL 
CRASH PAD 
(REF) 
SUNVISOR 
TRACK 
SUNVISOR 
SEE  B 
SLIDER 
BRACKET 
SEE  C 
TRACK 
FWD  MOUNTING 
SPINDLE  SCREW 
SCREWS  INBD 
SUNVISOR TRACK 
A 
HOLDER 
SUNVISOR 
TRACK 
UPPER SILL  SUNVISOR 
CRASH PAD 
(REF) 
HOLDER 
PLATE 
SUNVISOR  SLIDER 
BRACKET 
(2 LOCATIONS) 
SUNVISOR  SLIDER BRACKET 
B  C 
Sunvisor 
Figure 501 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-13-03
 ALL  ú ú 01 Page 502 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
 1.
2.

3.

4.

5.

A
747-400 MAINTENANCE MANUAL
 FLIGHT COMPARTMENT CEILING LINING -
_________________________________ DESCRIPTION AND OPERATION
_________________________
General
_______
 A.  The flight compartment ceiling is insulated and acoustically lined with dripshields, and decorative lining panels (Fig. 1). Insulated dripshields are installed in the ceiling areas. Decorative lining panels cover the ceiling except in the area where overhead instrument panels are installed.
Ceiling Lining
______________
 A.  The ceiling lining panels are made of fiberglass material coated with decorative paint on the inboard finished surface. The fiberglass material is flexible and easily formed to the required contour or bend. Cutouts are provided in the panels where equipment extends below the ceiling.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 1(45)