Doc # 6.02.01 Page 11
Rev. 4 09 Jan 2003
05-50-00
Maintenance Checks
AMM
%
%
%
%
%
%
%
%
%
DA 40 Series
Detail Steps/Work Items Key Items
(16) Operate the cockpit heating controls through their range of movement. Look specially for: S Stiff or unusual feel during movement. S Restriction of movement. S Noisy operation. Refer to Section 21-40.
(17) Operate the parking brake control through its range of movement. Look specially for: S Stiff or unusual feel during movement. S Restriction of movement. S Noisy operation. Refer to Section 32-40.
(18) Do an engine run-up. Look specially for abnormal operation of the following systems: S Engine indicating systems. S DC generation. Refer to Section 71-00 (Lycoming version) or 71-01 (TAE version). Refer to Section 31-00. Refer to Section 24-30 (Lycoming version) or 24-33 (TAE version).
(19) Do an ECU test. TAE version only. Refer to Section 05-20, Paragraph 7.B.
(20) Do an ECU swap test. TAE version only. Refer to Section 05-20, Paragraph 7.B.
(21) Contact the engine manufacturer. TAE verision only.
(22) Do a compass check swing.
Page 12 Doc # 6.02.01 09 Jan 2003 Rev. 4
05-50-00
Dimensions and Areas
AMM
CHAPTER 06
DIMENSIONS AND AREAS
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003
06-TITLE
AMM
Intentionally left blank
06-TITLE
Dimensions and Areas
AMM
TABLE OF CONTENTS
CHAPTER 06
DIMENSIONS AND AREAS
1.
General ..............................................1
2.
Dimensions ...........................................4
3.
Adjustment Values.....................................10
4.
Weight and Static Moments of Control Surfaces ..............10
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003
06-CONTENTS
AMM
Intentionally left blank
06-CONTENTS
Dimensions and Areas
AMM
CHAPTER 06
DIMENSIONS AND AREAS
1. General
The DA 40 uses the System Internationale (SI) for dimensions and areas. Imperial dimensions are also given in brackets. For example: Wing span 11.94 m (39.2 ft).
Conversions between SI units and imperial units are given in Chapter 02.
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003
06-00-00
AMM
3.29 m (10.8 ft)
% Figure 1: DA 40 with Lycoming Engine, Overall Dimensions (Approximate Values)
Page 2 Doc # 6.02.01 09 Jan 2003 Rev. 4
06-00-00
Dimensions and Areas
AMM
%
% 3.29 m (10.8 ft)
%
% Figure 2: DA 40 with TAE Engine, Overall Dimensions (Approximate Values)
06-00-00
AMM
2. Dimensions
%
%
%
DA 40 Series
DA 40
Overall Dimensions
Wing span 11.94 m (39.2 ft)
Length Lycoming version 8.01 m (26.3 ft)
TAE version 8.06 m (26.4 ft)
Height (Nominal) 1.97 m (6.5 ft)
Wing
Airfoil Wortmann FX 63-137/20-W4
Wing area 13.54 m2 (145.7 ft2)
Dihedral (Nominal) 5°
Angle of incidence (Nominal) 3o
Horizontal Tail Surfaces
Span 3.29 m (10.8 ft)
Angle of incidence -3.0o
Landing gear (Typical static, normal load)
Wheel Track 2.97 m (9.74 ft)
Wheel base 1.68 m (5.51 ft)
Nose wheel 5.00-5; 6 PR, 120 mph
Main wheel 6.00-6; 6 PR, 120 mph
