6. Remove/Install a Strobe Power Unit in the Wing-Tip
A. Remove a Strobe Power Unit in the Wing-Tip
%
%

Detail Steps/Work Items  Key Items/References 
(1)  Set the ALT/BAT switch (Lycoming version) or ELECTRIC MASTER key switch (TAE version) to OFF. 
(2)  Set the STROBE switch to OFF and set the STROBE circuit-breaker open. 
WARNING: AFTER YOU SET THE POWER TO OFF, MAKE SURE THAT YOU WAIT A MINIMUM OF FIVE MINUTES BEFORE YOU DO WORK ON THE STROBE LIGHTS. THE POWER SUPPLIES TO THE STROBE LIGHTS GENERATE HIGH VOLTAGE. HIGH VOLTAGE CAN CAUSE DEATH OR INJURY TO PERSONS. 
(3)  Remove the wing tip from the wing: S Remove the screws which attach the wing tip to the wing. S Move the wing tip just clear of the wing and disconnect the electrical connectors. S Move the wing tip clear of the airplane 
(4)  Remove the power unit from the inside of the wing tip assembly. 

B. Install a Strobe Power Unit in the Wing-Tip
Detail Steps/Work Items  Key Items/References 
(1)  Install the power unit in the wing tip. 
(2)  Move the wing tip close to the wing and connect the electrical connectors. 
(3)  Install the wing tip onto the wing: S Put the wing tip into position on the wing. S Install the screws which attach the wing tip to the wing. 

Doc # 6.02.01 Page 207
Rev. 4 09 Jan 2003

33-40-00
AMM

%
%
%

%
%

DA 40 Series

Detail Steps/Work Items  Key Items/References 
WARNING: DO NOT OPERATE THE STROBE LIGHTS WHEN PERSONS ARE CLOSE TO THE AIRPLANE AND DO NOT LOOK AT THE LIGHT WHEN IT OPERATES. STROBE LIGHTS CAN CAUSE EYE DAMAGE. 
(4)  Do an operational test of the position and strobe lights: S Set the ALT/BAT switch (Lycoming version) or ELECTRIC MASTER key switch (TAE version) to ON. S Set the LANDING, TAXI/MAP and STROBE circuit-breakers closed. S Set the POSITION and STROBE switches to ON. 
(5)  Set the POSITION and STROBE switches to OFF. 
(6)  Set the ALT/BAT switch (Lycoming version) or ELECTRIC MASTER key switch (TAE version) to OFF. 

Page 208 Doc # 6.02.01 09 Jan 2003 Rev. 4
33-40-00
Navigation
AMM

CHAPTER 34
NAVIGATION

Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003

34-TITLE
AMM

Intentionally left blank
34-TITLE
Navigation
AMM

TABLE OF CONTENTS
CHAPTER 34
NAVIGATION

1.
General ..................................................1

2.
Description................................................1

Section 34-10
Flight Environment Data

1.
General ..................................................1

2.
Description................................................1

Trouble-Shooting
1. General ................................................101

Maintenance Practices
1.
General ................................................201

2.
Remove/Install a Pitot-Static Instrument ......................201

3.
Remove/Install the Pitot-Static Probe.........................202

4.
Remove/Install the OAT Indicator............................203

5.
Pitot and Static System Leak Tests ..........................204

Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003

34-CONTENTS
AMM

Section 34-20
Attitude and Direction

1. General ..................................................1

Section 34-22
Magnetic Compass

1.
General ..................................................1

2.
Description and Operation ...................................1
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石40飛機維護手冊 DA 40 SERIES AMM 3(93)