(2)
Remove the blanking plugs from the disconnected line ends.
(3)
Clean the component interface and/or the adjacent area.
(4)
Apply lubricant: CAUTION : USE ONLY THE SPECIFIED LUBRICANT TO LUBRICATE THE O-RINGS
_______ AND THE PACKINGS. OTHER LUBRICANTS CAN CAUSE SMOKE OR A SMELL IN THE CABIN WHEN THEY BECOME HOT.
(a) Apply a small quantity of:
-COMMON GREASE (Material No. 04-007) or
-LUBRICANTS (Material No. 06-007) to the new seal (5) and the new packing (14).
NOTE : The material 04-007 is a molybdenum disulfide powder.
____ Before you can apply it you must first make it into a paste. To do this you must mix the powder with pure water or white spirit.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 21-52-23Page 416 1201-228, 301-302, 401-499, 1Aug 01/05 1 1 1CES 1 NOTE : The material 06-007 is applied dry.
____
(5)
Put the sleeve (16) on the air-cycle machine outlet (13).
(6)
Put the packings (14) in position on the pipe assembly (21) and on the air-cycle machine outlet (13).
(7)
Put the seal (5) in position in the sleeve (4).
(8)
Put the pipe assembly (21) in position in the sleeve (4).
NOTE : Turn the pipe assembly (21) when you install it. This will
____
help to prevent damage to the seal (5).
(9)
Move the sleeve (16) in position over the packings (14).
NOTE : Make sure that the sleeve (16) covers the flanges on the
____ air-cycle machine outlet (13) and the pipe assembly (21).
(10)
Put the half-clamps (12) in position and install the clamp (15). NOTE : Do not fully tighten at this time.
____
(11)
Apply a small quantity of COMMON GREASE (Material No. 04-012) to the contact faces of the retaining cables (3).
(12)
Make sure that the pipe assembly (21) is correctly aligned and put the retaining cables (3) in position.
(13)
Install the new washers (2) and the new nuts (1). NOTE : Hold the hexagon part of the retaining cables (3) to prevent
____ twisting of the cables when you install the nuts (1).
(14)
TORQUE the nuts (1) to between 0.85 and 1.0 m.daN (75.22 and 88.49 lbf.in).
NOTE : Hold the hexagon part of the retaining cables (3) to prevent
____ twisting of the cables when you torque the nuts (1). Make sure that there is no tension in the cables (3). This will give a safe and flexible connection.
(15)
Wipe clean the excess COMMON GREASE (Material No. 04-012) from the retaining cables (3).
(16)
Make sure that the half-clamps (12) and the clamp (15) are in the correct position.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 21-52-23Page 417 1201-228, 301-302, 1Aug 01/05 1 1 1CES 1
(17)
TORQUE the clamp (15) to between 0.28 and 0.38 m.daN (24.77 and 33.62 lbf.in) and safety with annealed stainless-steel lockwire, diameter
08. mm (0.3149 in.) MISCELLANEOUS (Material No. 19-010).
(18)
Connect the sense line (6).
(19)
TORQUE the sense line (6) connector to between 0.95 and 1.05 m.daN
(84.07 and 92.92 lbf.in).
(20)
Remove the blanking caps from the electrical connectors (9) and (17).
(21)
Make sure that the electrical connectors are clean and in the correct condition.
(22)
Connect the electrical connectors (9) and (17).
(23)
Make sure that the work area is clean and clear of tool(s) and other
items. R
R **ON A/C 106-149, 229-299, 303-399,
Subtask 21-52-23-420-052-A
B. Installation of the Pipe Assembly
(1)
Make sure that the parts retained from the removed component are clean and in the correct condition.
(2)
Remove the blanking plugs from the disconnected line ends.
(3)
Clean the component interface and/or the adjacent area.
(4)
Apply lubricant: CAUTION : USE ONLY THE SPECIFIED LUBRICANT TO LUBRICATE THE O-RINGS
_______ AND THE PACKINGS. OTHER LUBRICANTS CAN CAUSE SMOKE OR A SMELL IN THE CABIN WHEN THEY BECOME HOT.
(a) Apply a small quantity of:
-COMMON GREASE (Material No. 04-007) or
-LUBRICANTS (Material No. 06-007) to the new packing (14) .
NOTE : The material 04-007 is a molybdenum disulfide powder.
____
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 21-52-23Page 418 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
Before you can apply it you must first make it into a
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AIR CONDITIONING 空調 4(54)
