B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 16-047  F ASNA3687 DECORATIVE PAINT (INTERNAL APPLIC.) (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power

 3. Job Set-up
__________ Subtask 25-13-00-861-051
 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 4. Procedure
_________ Subtask 25-13-00-370-050
 A. Painting Procedure
 (1)
 Put masking paper and masking tape on the area adjacent to the damage.

 (2)
 Remove the damaged paint and primer coatings with Grade 220 - 240 emery cloth.

 NOTE : Make sure that the surface is smooth and flat.
____
 (3)
 Clean the prepared and adjacent areas with a vacuum cleaner to remove particles of dust and dirt.

 (4)
 Apply a thin layer of paint of the applicable color STRUCTURE PAINTS (Material No. 16-047).

 NOTE : Make sure that the thickness is not more than 25 micrometers.
____
 (5) Remove the masking paper and masking tape.
 5. Close-up
________ Subtask 25-13-00-860-050
 A. Make sure that the work area is clean and clear of tool(s) and other items.
 Subtask 25-13-00-862-051
 B. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

R FOOT REST ASSEMBLY - REMOVAL/INSTALLATION
_________________________________________
 TASK 25-13-14-000-001
 Removal of the Foot Rest and Sliding Table Assembly

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-13-14-991-001 Fig. 401
 3. Procedure
_________
 (Ref. Fig. 401/TASK 25-13-14-991-001)
 Subtask 25-13-14-020-050

 A. Removal of the Foot Rest and sliding Table Assembly
 (1)
 Remove the thermoformed cover from the left (right) instrument panel.

 (2)
 Remove the screws (2).

 (3)
 Remove the screws (3).

 (4)
 Remove the screws (4) and retain the slot flap (5).

 (5)
 Remove the slot flap (5).

 (6)
 Remove the foot rest and sliding table assembly (1) from the framework (6).

 EFF : ALL

25-13-14Page 401

 Foot Rest and Sliding Table Assembly.
 Figure 401/TASK 25-13-14-991-001
 EFF :  ALL  25-13-14 Page 402 
Feb 01/98
 CES 

 TASK 25-13-14-400-001 Installation of the Foot Rest and Sliding Table Assembly
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-13-14-991-001 Fig. 401
 3. Procedure
_________ (Ref. Fig. 401/TASK 25-13-14-991-001) Subtask 25-13-14-420-050
 A. Installation of the Foot Rest and Sliding Table Assembly
 (1)
 Install the foot rest and sliding table assembly (1) on the framework (6).

 (2)
 Install the screws (2).

 (3)
 Install the slot flap (5) and the screws (4).

 (4)
 Install the screws (3) and tighten them.

 (5)
 Tighten the screws (4) and (2).

 (6)
 Install the thermoformed cover on the left (right) instrument panel.

 4. Close up
________ Subtask 25-13-14-942-050
 A. Removal of Equipment
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備1(121)