CES
R **ON A/C 004-049, 053-099, 101-105, 151-199, 301-399, 401-499,
TASK 25-00-00-340-012
Repair of the Lavatory Plastic Wash Basin
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 CUTTER - THIN BLADE No specific 1 PLIERS - NOSE, SOFT, LONG No specific 1 WARNING NOTICE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific abrasive paper, grain 180 No specific abrasive paper, grain 220 No specific abrasive paper, grain 320 No specific wooden block No specific DCIN900 VARICOR repair kit No specific Emery Cloth, 320-400 grade Material No. 08-051 USA MMM-A-132 TYPE I
EPOXY RESIN (Ref. 20-31-00) Material No. 08-074 MASKING TAPE (Ref. 20-31-00) Material No. 08-084 D DAN 490B POLYESTER FILM TAPE (TRANSPARENT) (Ref. 20-31-00) Material No. 11-006 USA OM-232-GR-A AMS-3004 MIL-A-6090 METHYL ALCOHOL (Ref. 20-31-00) Material No. 11-010 USA TT-I-735 GRADE A ISOPROPYL ALCOHOL (Ref. 20-31-00) Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R EFF : 004-049, 053-099, 101-105, 151-199, 25-00-00Page 864 301-399, 401-499, Aug 01/05
CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-011 SCOTCH BRITE PADS (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-21-12-100-009 Cleaning of the Plastic Wash Basin in the Lavatories 24-42-00-861-001 Energize the Ground Service Network from the External
Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
the External Power 25-45-15-000-001 Removal of the Waste Chute Flap 25-45-15-400-001 Installation of the Waste Chute Flap 25-45-17-400-001 Installation of the Waste Box 25-00-00-991-019 Fig. 812 25-00-00-991-031 Fig. 813
3. Job Set-up
__________
Subtask 25-00-00-861-070
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________
Subtask 25-00-00-330-059
A. Removal of Scratches
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R EFF : 004-049, 053-099, 101-105, 151-199, 25-00-00Page 865 301-399, 401-499, Aug 01/05
CES NOTE : Scratches deeper than 0.3 mm (0,012 in.) have to be repaired as
____
convenient to the customer:
-
in the customers work shop with a repair kit.
-
in the manufacturers work shop.
(1) Remove the scratches up to a depth 0.3mm (0.012 in.) with abrasive paper.
NOTE : The grade of grain of the abrasive paper depends on the depth
____
of the scratches.
(a) Make the repair area smooth with:
-
abrasive paper, grain 180,
-
abrasive paper, grain 220,
-
abrasive paper, grain 320
- or use the SCOTCH BRITE PADS MISCELLANEOUS (Material No. 19-011).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備1(60)
