B. Third Occupant Seat
 (1)
 General The 3rd Occupant seat is a folding seat attached to the right rear panel in the cockpit. It can slide along the Y-axis to take up a position on the aircraft centerline. No longitudinal adjustment is provided. The seat pan unfolds and locks only in the unfolded position, in the aircraft centerline.

 (2)
 Description

 **ON A/C 001-049, 051-099, 101-105,
 (Ref. Fig. 004)
R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 004A)
 EFF : ALL

25-11-00Page 6

 Third Occupant Seat Figure 004 
R  EFF :  001-049, 051-099, 101-105,  25-11-00 Page 7 May 01/05
 CES 

 Third Occupant Seat Figure 004A 
R  EFF : 106-149, 151-199, 201-299, 301-399, 401-499,  25-11-00 Page 8 Aug 01/05
 CES 

 **ON A/C ALL
 (3) Controls A manual control enables the seat to be moved from its stowage position to its utilization position on the aircraft centerline. A second control serves to unlock the headrest. A third control serves to lock the inertia reel.
 **ON A/C 001-049, 051-099, 101-105,
 (4) Seat equipment The headrest can be folded down so that the circuit breaker panel can be opened while the seat is in its stowed position. A compartment closed by VELCRO tapes and containing a life vest is provided in the lower part of the seat. The safety harness includes five straps and an inertia reel controlled by a handle located on the left of the seat. This handle serves to lock and unlock the inertia reel.
R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
 (4) Seat equipment. The non-adjustable armrests pivot on the seat uprights. The headrest can be folded down so that the circuit breaker panel can be opened while the seat is in its stowed position. A compartment closed by VELCRO tapes and containing a life vest is provided in the lower part of the seat. The safety harness includes five straps and an inertia reel controlled by a handle located on the left of the seat. This handle serves to lock and unlock the inertia reel.
 **ON A/C ALL
 C. Fourth Occupant Seat
 (1) General The Fourth Occupant seat is a folding seat located against the left rear partition in the cockpit. The seat cushion is folded down into place. It is returned to its stowed position by pressing upwards and against the partition. The lower section of the seat is provided with a compartment containing a life vest and closed by VELCRO tapes.
 EFF : ALL

25-11-00Page 9

 The straps of the safety harness can be clicked into the buckle in any order. Turning the unlocking control through a 1/4 turn, either clockwise or anticlockwise, releases the two shoulder straps and the lap belt. Pressing the control located on the top of the buckle releases the shoulder straps alone. The inertial reel locking control is located in the coat storage compartment.
 (2) Description (Ref. Fig. 005)
 4. Operation/Control and Indicating
________________________________
 A. Captain and First Officer Seats
 (1) Vertical travel
 (a) Manual control (Ref. Fig. 006)
 1_ Up travel
 To move the seat in the up direction pull the control handle,
 marked V and located on the inboard side of the seat pan,
 upwards in order to unlock the seat. Then, by taking your
 weight off the seat, adjust the seat to required position,
 then release the handle. A gas cylinder compensates for the
 weight of the seat (2 grasp handles are located above each
 pilot seat).
 2_ Down travel
 To move the seat in the down direction, pull the control
 handle upwards in order to unlock the seat. The weight of the
 occupant is sufficient to move the seat downwards. To lock the
 seat in position, release the handle. The down movement is
 slowed down by means of a gas cylinder.
 NOTE : The control handle V acts on a ball-nut/screw system____
 ensuring vertical movement of the seat.

 EFF : ALL

25-11-00Page 10
May 01/04
R
 CES

 Fourth Occupant Seat Figure 005
R  EFF : CES  ALL  25-11-00 Page 11 May 01/99 

 Manual Control Figure 006 
R  EFF :  ALL  25-11-00 Page 12 May 01/03
 CES 

 (b) Vertical electrical control (Ref. Fig. 007) If the circuit is supplied with power, place the control switch located on the inner side of the seat pan in the up or down position until the seat reaches the required position. Seat movements are obtained by the gear motor associated with the ball-nut/screw system. The movements are limited by stops and an overtorque detector integrated in the gear motor assembly.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備1(96)