4. Procedure
_________ (Ref. Fig. 401/TASK 25-13-43-991-001) Subtask 25-13-43-420-050
 A. Installation of the Fixed Window Roller-Blind
 (1)
 Put the roller-blind (5) in position.

 (2)
 Install the washer (4) and tighten the screws (3).

 5. Close-up
________ Subtask 25-13-43-860-052
 A. Put the aircraft back to its initial configuration.
 (1)
 Put the cover (1) in position and tighten the screws (2).

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.

 EFF : ALL

25-13-43Page 403

 CARPET - COCKPIT - REMOVAL/INSTALLATION
_______________________________________
 TASK 25-13-44-000-001
 Removal of the Cockpit Textile Floor Covering (Carpet)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
 Power 25-11-41-000-001 Removal of the Third Occupant Seat 25-11-42-000-001 Removal of the Fourth Occupant Seat (13MM) 25-11-51-000-001 Removal of the Captain/First Officer Seat (3MS, 4MS) 25-13-44-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 25-13-44-861-050
 A. Energize the aircraft electrical circuits
 (Ref. TASK 24-42-00-861-001).

 4. Procedure
_________ (Ref. Fig. 401/TASK 25-13-44-991-001) Subtask 25-13-44-020-050
 A. Removal of the Seats
 (1)
 Remove the Fourth Occupant seat (Ref. TASK 25-11-42-000-001).

 (2)
 Remove the Third Occupant seat (Ref. TASK 25-11-41-000-001).

 (3)
 Remove the Captain and the First Officer seats (Ref. TASK 25-11-51-000-001).

 EFF : ALL

25-13-44Page 401

 Textile Floor Covering
 Figure 401/TASK 25-13-44-991-001
 EFF :  ALL  25-13-44 Page 402 
Aug 01/05
 CES 

 Subtask 25-13-44-020-051
 B. Removal of the Textile Floor Covering
 (1)
 Remove the twelve screws (5).

 (2)
 Remove the grid (3).

 (3)
 Remove the cover strip (4).

 (4)
 Remove the floor covering (1):

 (a)
 Use a non-metallic scraper to release the carpet from the floor.

 (b)
 Remove the remaining double-sided adhesive tape (2) with the non-metallic scraper.

 EFF : ALL

25-13-44Page 403

 TASK 25-13-44-400-001
 Installation of the Cockpit Textile Floor Covering (Carpet)
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ROLLER - RUBBER
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-065 USA MIL-T-60394 TYPE I CLASS I
 DOUBLE SIDED ADHESIVE TAPE (Ref. 20-31-00) Material No. 11-003 USA ASTM D 740
 METHYL-ETHYL-KETONE (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
 Power 25-11-41-000-001 Removal of the Third Occupant Seat 25-11-41-400-001 Installation of the Third Occupant Seat 25-11-42-000-001 Removal of the Fourth Occupant Seat (13MM) 25-11-42-400-001 Installation of the Fourth Occupant Seat (13MM) 25-11-51-000-001 Removal of the Captain/First Officer Seat (3MS, 4MS) 25-11-51-400-001 Installation of the Captain/First Officer Seat (3MS,
 4MS) 25-13-44-991-001 Fig. 401
 EFF : ALL

25-13-44Page 404

 3. Job Set-up
__________ Subtask 25-13-44-860-050
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備1(130)