(7)
Install the eight screws (15) and the eight washers (16) and tighten.
1EFF : ALL 1 34-41-37Page 410 1 1 May 01/05 1 1 1CES 1
(8) Tighten the four screws (18). R **ON A/C 001-049, 101-105,
Subtask 34-41-37-420-052
B. Installation of Mounting Tray
(1)
Install the Mounting tray (21) in its housing (2). Install the eight screws (22) and tighten.
(2)
Remove the blanking caps from the disconnected electrical connectors (1), (3) and (9).
(3)
Make sure that the electrical connectors are clean and in the correct condition.
(4)
Install the electrical connectors (3) in their housing.
(5)
Install the attachment plates (4) and attach them with the ten washers (5) and the screws (6).
(6)
Put the O-rings (14) in their housings.
(7)
Put the window (13) and the wave guide (12) in position.
(8)
Install the four washers (11) and the screws (10).
(9)
Tighten the screws (10) and safety them with the lockwire.
(10)
Remove the blanking plugs from the disconnected line ends (8).
(11)
Connect the ventilation lines (8). Tighten the clamps (7).
(12)
Connect the connector (9) to the receptacle (1).
(13)
Make sure that the electrical connectors are clean and in the correct
condition. R
R 1EFF : ALL 1 34-41-37Page 411 1 1 May 01/05 1 1 1CES 1R **ON A/C 051-099, 106-149, 201-299, 301-399, 401-499,
Subtask 34-41-37-420-052-B
B. Installation of Mounting tray
(1)
Install the Mounting tray (21) in its housing (2) with the eight washers (23) and the screws (22).
(2)
Remove the blanking caps from the disconnected electrical connectors (1), (3) and (9).
(3)
Make sure that the electrical connectors are clean and in the correct condition.
(4)
Install the electrical connectors (3) in their housing.
(5)
Install the attachment plates (4) and attach them with the twenty washers (5) and the screws (6).
(6)
Put the O-rings (14) in their housings.
(7)
Put the window (13) and the wave guide (12) in position.
(8)
Install the four washers (11) and the screws (10).
(9)
Tighten the screws (10) and safety them with the lockwire.
(10)
Remove the blanking plugs from the disconnected line ends (8).
(11)
Connect the ventilation line (8). Tighten the clamps (7).
(12)
Connect the connector (9) to the receptacle (1).
(13)
Make sure that the electrical connectors are clean and in the correct condition.
R 1EFF : 051-099, 106-149, 201-299, 301-399, 1 34-41-37Page 412 1401-499, 1Aug 01/05 1 1 1CES 1 1EFF : ALL 1 34-41-37Page 413 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 34-41-37Page 414 1 1 Aug 01/05 1 1 1CES 1 WAVE GUIDE ASSEMBLY (301FM) - REMOVAL/INSTALLATION
R **ON A/C 151-199,
R Subtask 34-41-37-420-052-C
R B. Installation of Mounting Tray
R (1) Install the Mounting tray (21) in its housing (2) with the eight
R screws (22).
R (2) Remove the blanking caps from the disconnected electrical connectors
R (1), (3) and (9).
R (3) Make sure that the electrical connectors are clean and in the correct
condition.
R (4) Install the electrical connectors (3) in their housing.
R (5) Install the attachment plates (4) and attach them with the twenty
R washers (5) and the screws (6).
R (6) Put the O-rings (14) in their housings.
R (7) Put the window (13) and the wave guide (12) in position.
R (8) Install the four washers (11) and the screws (10).
R (9) Tighten the screws (10) and safety them with the lockwire.
R (10) Remove the blanking plugs from the disconnected line ends (8).
R (11) Connect the ventilation lines (8). Tighten the clamps (7).
R (12) Connect the connector (9) to the receptacle (1).
R (13) Make sure that the electrical connectors are clean and in the correct
R condition.
**ON A/C ALL
5. Close-up________
R **ON A/C 001-049, 101-105,
(Ref. Fig. 401/TASK 34-41-37-991-001)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航3(71)
