曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Subtask 52-81-00-220-056
 G. Dimensional Check of the Aft Hinge Assembly
 (1) Between the outer dimension of the spacer (3) and the inner dimension of the bush (2).
 1EFF : ALL 1 52-81-00Page 612 1 1 Feb 01/98 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 20.959 | 20.980 | | | 20.918 | | | | OD 3 |(0.8251) |(0.8259) | | |(0.8235) | | | | | | | 0.020 | 0.062 | | | 0.144 | | | | | (0.0007)| (0.0024)| | |(0.0056)| | E | 21.000 | 21.021 | | | | 21.062 | | | ID 2 |(0.8267) |(0.8275) | | | |(0.8292) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-057
 H. Dimensional Check of the Aft Hinge Assembly
 (1) Between the outer dimension of the bolt (9) and the inner dimension of the flexible bearing (5).
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 15.966 | 15.984 | | | 15.906 | | | | OD 9 |(0.6285) |(0.6292) | | |(0.6262) | | | | | | | 0.016 | 0.104 | | | 0.224 | | | | | (0.0006)| (0.0040)| | |(0.0088)| | E | 16.000 | 16.070 | | | | 16.130 | | | ID 5 |(0.6299) |(0.6326) | | | |(0.6350) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-058
 J. Dimensional Check of the Forward Hinge Assembly
 (1) Between the outer dimension of the bolt (10) and the inner dimension of the flange bush (11).
 1EFF : ALL 1 52-81-00Page 613 1 1 Feb 01/98 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 15.841 | 15.859 | | | 15.807 | | | | OD 10 |(0.6236) |(0.6243) | | |(0.6223) | | | | | | | 0.016 | 0.052 | | | 0.120 | | | | | (0.0006)| (0.0020)| | |(0.0047)| | F | 15.875 | 15.893 | | | | 15.927 | | | ID 11 |(0.6250) |(0.6257) | | | |(0.6270) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-059
 K. Dimensional Check of the Forward Hinge Assembly
 (1) Between the outer dimension of the bolt (10) and the inner dimension of the bearing (16).
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 15.841 | 15.859 | | | 15.822 | | | | OD 10 |(0.6236) |(0.6243) | | |(0.6229) | | | | | | | 0.003 | 0.034 | | | 0.072 | | | | | (0.0001)| (0.0013)| | |(0.0028)| | F | 15.862 | 15.875 | | | | 15.894 | | | ID 16 |(0.6244) |(0.6250) | | | |(0.6257) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-060
 L. Dimensional Check of the Forward Hinge Assembly
 (1) Between the outer dimension of the flange bush (11) and the inner dimension of the fitting (17).
 1EFF : ALL 1 52-81-00Page 614 1 1 Feb 01/98 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 24.055 | 24.075 | | | 24.055 | | | | OD 11 |(0.9470) |(0.9478) | | |(0.9470) | | | | | | | -0.075 | -0.034 | | | 0.034 | | | | |-(0.0029)|-(0.0013)| | |(0.0013)| | F | 24.000 | 24.021 | | | | 24.021 | | | ID 17 |(0.9448) |(0.9457) | | | |(0.9457) | | -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門8(102)