-
the CABIN and EMER EXIT messages go out of view.

On the lower ECAM display unit, on the DOOR/OXY page:

-
the symbols of the avionicscompartment doors and the two cargo-compartment doors become green.

 -
the AVIONIC and CARGO messages go out of view.

 1EFF : 301-399, 1 52-71-00Page 520 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------- close the circuit breaker 13WN.
 11. On the circuit breaker panel 49VU: - close the circuit breakers 3WW and 3WV.
 **ON A/C ALL
 5. Close-up________
 Subtask 52-71-00-860-061
 A. Put the aircraft back to its initial configuration.
 (1) Do an EIS Stop Procedure (Ref. TASK 31-60-00-860-002). 
R  Subtask 52-71-00-865-081 
R R  B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 
R R R R R R  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU LIGHTING/EMER LT/CABIN 2WL H06 49VU LIGHTING/EMER LT/CABIN 1WL H05 122VU LIGHTING/CABIN/EMER/LT 3WL V07 
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 52-71-00-410-071 
R  C. Close Access
 (1) Arm the escape slides of the emergency exits (3):
 **ON A/C 001-049, 051-099, 101-149, 201-299,
 (Ref. Fig. 501/TASK 52-71-00-991-006)

 1EFF : ALL 1 52-71-00Page 521 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 151-199, 401-499,

 (Ref. Fig. 501A/TASK 52-71-00-991-006-A) R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 (a)
 With a wrench, turn the head of the latch pin (1) a quarter turn clockwise, to extend the latch pin (1).

 (b)
 Make sure that the SLIDE ARMED indicator light (4) comes on.

 (c)
 Install and close the cover flaps (2) on the emergency exits (3).

 (d)
 Make sure that the SLIDE ARMED indicator light (4) goes off.

 (2)
 Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (4)
 Close the applicable passenger/crew door (Ref. TASK 52-10-00-410-001).

 (5)
 Remove the access platform(s).

 (6)
 Make sure that the work area is clean and clear of tool(s) and other items.

 **ON A/C 301-399,
 Subtask 52-71-00-410-071-A R C. Close Access
 (1)
 Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).

 (2)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (3)
 Close the applicable passenger/crew door (Ref. TASK 52-10-00-410-001).

 1EFF : ALL 1 52-71-00Page 522 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-71-00Page 523 1 1 Aug 01/05 1 1 1CES 1 TASK 52-71-00-820-001

R R  (4) Obey the special precautions after the work on the emergency exit (Ref. TASK 52-22-00-860-004).
 (5) Close the emergency exit (Ref. TASK 52-22-00-410-002).
 (6) Remove the access platform(s).
 (7) Make sure that the work area is clean and clear of tool(s) and other items.
 **ON A/C ALL
 Subtask 52-71-00-862-050 
R  D. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

 Adjustment of the Proximity Switches (11WV1, 11WV2, 15WV1, 15WV2) of the Locking Hook of the Pax/Crew Doors with the CHECKING TOOL-DOOR
 1. Reason for the Job
__________________
 There is an alternative method for this procedure. This task gives one of the methods. For the other method refer to the other task in this page block.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific access platform 3.5 m (11 ft. 6 in.) 355M03210000 1 CHECKING TOOL-DOORS
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門8(3)