R 1EFF : ALL 1 52-71-12Page 411 1 1 May 01/05 1 1 1CES 1
R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-71-12-720-050
E. Operational Test
(1)
Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001).
(2)
Do this test to make sure that the proximity switch operates correctly.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the FWD and/or AFT cargo On the lower display unit of the ECAM door(s): system:
-
push the handle flap in and - the symbol of the applicable cargo pull the door handle away from door is shown in amber, the cargo door. - the related message CARGO comes on.
-
push the dooor handle down into - the symbol for the applicable cargo the recess of the door door changes to green, structure. - the message CARGO goes off.
(3)
Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
(4)
If required, adjust the applicable proximity switch (Ref. TASK 52-71-00-820-004).
R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-71-12Page 412 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 051-052,
R Subtask 52-71-12-720-050-A
R E. Operational Test
R (1) Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) R (Ref. TASK 31-60-00-860-001).
R (2) Do this test to make sure that the proximity switch operates R correctly.
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the FWD and/or AFT cargo R door(s): R - push the handle flap in and R pull the locking handle away R from the cargo door.
R - push the locking handle into R the recess of the handle flap. R
R (3) Do the EIS stop procedure On the lower display unit of the ECAM system:
-
the symbol of the applicable cargo door is shown in amber.
-
the related message CARGO comes on
-
the symbol for the applicable cargo door changes to green.
-
the message CARGO goes off
R (Ref. TASK 31-60-00-860-002).
R (4) If required, adjust the applicable proximity switch (Ref. TASK 52-71-R 00-820-004).
R 1EFF : 051-052, 1 52-71-12Page 413 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
5. Close-up
________ R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-71-12-410-050
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Make sure that the applicable cargo door is correctly closed (Ref. TASK 52-30-00-860-002).
(3) Remove the access platform(s).
**ON A/C 051-052,
Subtask 52-71-12-410-050-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the access panel 825AR or 826AR on the applicable cargo door.
(3)
Make sure that the applicable cargo door is correctly closed (Ref. TASK 52-30-00-860-002).
(4)
Remove the access platform(s).
1EFF : ALL 1 52-71-12Page 414 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 52-71-12-000-002
Removal of the Proximity Switches 30WV and 32WV
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
No specific access platform 3.50 m (11 ft. 6 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊(cè) AMM DOORS 艙門8(40)
