曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 Bolt (130) Bracket (140) on flange C At the 4 o'clock Nut (150) position (Detail F)
 Clamps (160) Brackets (170) on flange C From the 3:30 o'clock Bolts (190) to the 1:45 o'clock Nuts (180) positions (Detail G)
 (5 locations)
 Clamps (210) Bracket (220) on flange C From the 1 o'clock Bolts (200) to the 8:15 o'clock Nuts (230) positions (Detail H)
 (12 locations)
 Bolt (240) Bracket (250) on flange C At the 11:45 o'clock Nut (260) position (Detail J)
 Bolt (270) Bracket (280) on flange C At the 8 o'clock Nut (290) position (Detail K)
 (7) Distribute the slack all along the line.

 (8) TORQUE the nuts (30), (70), (110), (150), (180), (230), (260), (290) to to between 47 and 53 lbf.in (0.53 and 0.59 m.daN).

 (9) TORQUE the fan frame bosses and ECU connections to to between 135 and 150 lbf.in (1.52 and 1.69 m.daN).

 F 『 EEFF : ALL E Page 46972-23-00
 E E May 01/05 ERE
ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 (10) Safety with lockwire 0.032 in. (0.8 mm) dia. (Material No. CP8001) or lockwire 0.032 in. (0.8 mm) dia. (Material No. CP8002).
 NOTE : The PS3 and the PS12 connecting nuts are safetied together.
____
 ________

5. Close-up
 Subtask 72-23-00-410-096
 A. Close Access
 (1) Close the fan cowl doors: (Ref. TASK 71-13-00-410-040)
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (2) Remove the warning notice(s).
 Remove the access platform(s).

 

 F 『 EEFF : ALL E Page 47072-23-00
 E E May 01/05 ERE
ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 TASK 72-23-00-400-043
 Installation of Acoustical Panels Attachment Screw/Nut Locking
 1. Reason for the Job
__________________
R This procedure gives task to lock acoustical panel screws when the R corresponding self locking nut torque is smaller than the AMM limits. This R procedure applies to any acoustical panel screws: fwd, mid and aft. Any R screws and corresponding riveted self locking nuts locked per this procedure R will have to be changed at first shop visit opportunity.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
 No specific access platform 1 m (3 ft. 3 in.)
 No specific Torque Wrench : range 36.00 to 220.00 lbf.in

 (0.40 to 2.60 m.daN)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No.  CP1039 
Material No.  CP1041 
R  Material No.  CP2011 
R 
Material No.  CP2242 
R  Material No.  CP2559 
R 
R  Material No.  CP2560 
R 
R  Material No.  CP2566 
R 
R  Material No.  CP2584 
R 
F 
EEFF :  ALL 
E 
E 
ECES 

*
 acetone (Ref. 70-30-00)
*
 isopropyl alcohol (Ref. 70-30-00)
*
stoddard solvent (Ref. 70-30-00)
USA MIL-A-46106A
 RTV (Ref. 70-30-00)
*
ardrox 552 (Ref. 70-30-00)
*
turco ind 79 (Ref. 70-30-00)
*
mag-chem teksol (Ref. 70-30-00)
*
degreasol 99 R (Ref. 70-30-00)

『
E 72-23-00Page 471
E May 01/05EE -------------------------------------------------------------------------------

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
R Material No. CP2656 *
R mag-chem skysol (Ref. 70-30-00)

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
 71-13-00-410-040 Closing of the Fan Cowl Doors
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ENGINE 發動機 1(135)