-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
R  3. Fan MID acoustical 
R  panel (Ref. TASK 72-
23-00-280-006) 
R 
R  4. Fan aft acoustical 
R  panels (Ref. TASK 72-
23-00-280-007) 
R 
R  5. Splitter fairing for
 A. Cracks  Not serviceable 
R  B. Damaged protective  No limits in quantity
 coating 
R  C. Erosion  No limits in quantity 
R  6. Fan duct panels for:
 (Ref. Fig. 602/TASK
 72-23-00-991-309) 
R  A. Missing louver  1 missing louver 
R  permitted per panel if 
R  no more than 4 panels 
R  have this damage 
R 
R  B. Nicks, dents or  No limits
 scratches 
R  C. Loose bolts  Not serviceable 
R 
R 
D. Cracks in screw  One for each screw hole 
hole area  max length 0.25 in. 
F  『
 EEFF : ALL  E 
E  E
 E  E
 ECES  E

Replace the fairing (Ref. TASK 72-23-00-000-028) and (Ref. TASK 72-23-00-400-028)
Replace panel (Ref. TASK 72-23-00-000-027) and (Ref. TASK 72-23-00-400-027).
Make sure that washers are installed and torque bolts to between 85 and 95 lbf.in (0.96 and 1.07 m.daN)
Replace panel (Ref. TASK72-23-00-000-027) and

72-23-00Page 610
May 01/05

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------(6,35 mm) (Ref. TASK 72-23-00-400-027)
 E. Cracks in flanged  Not serviceable Repair panel (Ref. TASK edges 72-23-00-300-042)
R F. Cracks on louver 2 cracks permitted on Repair panel (Ref. TASK R and area adjacent the same panel 72-23-00-300-042) R to louver
 5. Close-up
________
 Subtask 72-23-00-410-082
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the thrust reverser doors (Ref. TASK 78-36-00-410-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR

 Subtask 72-23-00-440-061
 B. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041).
 Subtask 72-23-00-410-093
 C. Close Access
 (1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040): FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR

 (2) Remove the warning notice(s).

 F 『 EEFF : ALL E Page 61172-23-00
 E E May 01/05 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 TASK 72-23-00-210-003
 Detailed Inspection of Engine Inlet, Fan Blades, Fan Outlet and Abradable
 Material
 1. Reason for the Job
__________________
R Refer to the MPD TASK: 722000-C1
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  warning notice
 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
70-51-00-230-002  Fluorescent-Penetrant Inspection-Portable-Water
 Washable 71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors 72-00-00-200-005 Over-Serviceable-Limit Extensions 72-21-00-000-007 Removal of the Fan Rotor Blades 72-21-00-300-002 Replacement of Fan Rotor Blades in Pairs 72-21-00-300-028 Replacement of Fan Rotor Blades in Pairs 72-21-00-320-003 Blending of Fan Rotor Blades 72-21-00-400-007 Installation of the Fan Rotor Blades 72-23-00-000-008 Removal of the Fan Outlet Guide Vane (OGV) Doublets
R 72-23-00-300-040 Local Reconditioning of the Abradable Material-Defects less than 0.12 in. (3 mm) deep and 0.50 in.2
 (3.2 cm2) R 72-23-00-300-043 Repair of the Abradable (material) Shroud with R Circular Patches
 72-23-00-400-008  Installation of the Fan Outlet Guide Vane (OGV)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ENGINE 發動機 1(140)