(1) On the CFDS MENU page, get access to the AVIONICS STATUS page (Ref. AMM TASK 31-32-00-869-002).
4. Fault Isolation
_______________
R **ON A/C 001-004, 051-060,
A. If the test gives the maintenance message NO ILS 2 DATA:
- replace the RECEIVER-ILS, 2 (2RT2) (Ref. AMM TASK 34-36-31-000-001) and (Ref. AMM TASK 34-36-31-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the ILS RECEIVER OUT PORT 2 bus from the ILS receiver 2 (2RT2) to the first terminal block (Ref. ASM 34-36/01).
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060,
A. If the test gives the maintenance message NO MMR 2 DATA:
- replace the MMR-2 (40RT2) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
(1) If the fault continues:
- do a check and repair the wiring of the ILS RECEIVER OUT PORT 2 bus from the ILS receiver 2 (2RT2) to the first terminal block (Ref. ASM 34-36/01).
**ON A/C ALL
B. Do the test given in Para. 3.B.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 224
May 01/05 CES Loss of the ILS RECEIVER 2 OUTPUT PORT 2 Bus Identified by the EIS (DMC1)
1. Possible Causes
_______________
- RECEIVER-ILS, 2 (2RT2)
- MMR-2 (40RT2)
- wiring of the ILS RECEIVER OUT PORT 2 bus from the ILS receiver 2 (2RT2) to the first terminal block
- wiring of the ILS RECEIVER OUT PORT 2 bus from the MMR receiver 2 (40RT2) to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 31-60-00-740-002 EIS Input Test
AMM 31-60-00-740-007 GROUND SCANNING Test of the DMC
AMM 34-36-31-000-001 Removal of the ILS Receiver (2RT1,2RT2)
AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
AMM 34-36-31-400-001 Installation of the ILS Receiver (2RT1,2RT2)
AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,
40RT2)
ASM 34-36/01
3. Fault Confirmation
__________________
A. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C 001-004, 051-060,
121VU COM NAV/ILS/2 1RT2 K09
R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
121VU COM NAV/MMR/2 42RT2 L07
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 225
Aug 01/05 CES -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------**ON A/C 001-049, 051-061, 101-105, 201-203,
Post SB 34-1147 For A/C 001-004,051-060,
121VU COM NAV/MMR/2 42RT2 K09
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
B. Test
(1) Do the EIS input test (system 1) (Ref. AMM TASK 31-60-00-740-002).
R **ON A/C 106-149, 303-399, 401-499,
B. Test
(1) Do the Ground Scanning Test of the DMC (Ref. AMM TASK 31-60-00-740-007)
**ON A/C ALL
4. Fault Isolation
_______________
**ON A/C 001-004, 051-060,
A. If the test gives the maintenance message DMC 1 : NO ILS 2 DATA:
- replace the RECEIVER-ILS, 2 (2RT2) (Ref. AMM TASK 34-36-31-000-001) and (Ref. AMM TASK 34-36-31-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the ILS RECEIVER OUT PORT 2 bus from the ILS receiver 2 (2RT2) to the first terminal block (Ref. ASM 34-36/01) .
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 2(106)
