- repair the wiring of the defective programming pins (Ref. ASM 34-12/02).

 (2) If the pin programming is correct:

 - replace the ADIRU-2 (1FP2) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
 **ON A/C ALL
 B. Do the test given in Para. 3.

 Failure of the IR3 Aircraft-Identification Pin-Programming
 1. Possible Causes
_______________
 - ADIRU-3 (1FP3)

 - wiring of the defective programming pins

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
 AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
 AMM 34-14-00-740-001 Interface Test of the IR
 ASM 34-12/03

 3. Fault Confirmation
__________________
 A. Test Do the Interface test of the IR (system 3) (Ref. AMM TASK 34-14-00-740-001).
 4. Fault Isolation
_______________
R **ON A/C 001-049, 101-105, 151-199, 201-203,
 A. If the test gives the maintenance message WRG : ACFT IDENT PIN PROG:
 - do a check of the A/C IDENT CODE pin-programming pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E on the rack connector,

 - compare the status of the A/C IDENT CODE pin-programming with the status given in the ASM (Ref. ASM 34-12/03).

 (1) If the pin programming is incorrect:

 - repair the wiring of the defective programming pins (Ref. ASM 34-12/03).

 (2) If the pin programming is correct:

 - replace the ADIRU-3 (1FP3) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).

R **ON A/C 051-099, 106-149, 204-299, 301-399, 401-499,
 A. If the test gives the maintenance message WRG:ACFT TYPE PIN PROG/ADIRU3 (1FP3):
 - do a check of the A/C IDENT CODE pin-programming pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E on the rack connector,

 - compare the status of the A/C IDENT CODE pin-programming with the status given in the ASM (Ref. ASM 34-12/03).

 (1) If the pin programming is incorrect:

 - repair the wiring of the defective programming pins (Ref. ASM 34-12/03).

 (2) If the pin programming is correct:

 - replace the ADIRU-3 (1FP3) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
 **ON A/C ALL
 B. Do the test given in Para. 3.

 Failure of the ADIRU1 Mounting-Position Pin-Programming
 1. Possible Causes
_______________
 - ADIRU-1 (1FP1)

 - wiring of the defective programming pins

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
 AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
 AMM 34-14-00-740-001 Interface Test of the IR
 ASM 34-12/01

 3. Fault Confirmation
__________________
 A. Test Do the Interface test of the IR (system 1) (Ref. AMM TASK 34-14-00-740-001).
 4. Fault Isolation
_______________
R **ON A/C 001-049, 101-105, 151-199, 201-203,
 A. If the test gives the maintenance message WRG : MOUNTING POSITION PIN PROG:
 - do a check of the AZIMUTH ORIENTATION pin-programming pins AA/1A, 2A, 3A on the rack connector,

 - compare the status of the AZIMUTH ORIENTATION pin-programming with the status given in the ASM (Ref. ASM 34-12/01).

 (1) If the pin programming is incorrect:

 - repair the wiring of the defective programming pins (Ref. ASM 34-12/01).

 (2) If the pin programming is correct:

 - replace the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).

R **ON A/C 051-099, 106-149, 204-299, 301-399, 401-499,

 A. If the test gives the maintenance message WRG:MTG POS PIN PROG/ADIRU1 (1FP1):
 - do a check of the AZIMUTH ORIENTATION pin-programming pins AA/1A, 2A, 3A on the rack connector,

 - compare the status of the AZIMUTH ORIENTATION pin-programming with the status given in the ASM (Ref. ASM 34-12/01).

 (1) If the pin programming is incorrect:

 - repair the wiring of the defective programming pins (Ref. ASM 34-12/01).

 (2) If the pin programming is correct:
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 2(70)