(1) Do the operational test of the central warning systems (FWC 2) (Ref. AMM TASK 31-50-00-710-001).
4. Fault Isolation
_______________
R **ON A/C 001-004, 051-060,
A. If the test gives the maintenance message FWC 2 : NO DATA FROM ILS 2:
- replace the RECEIVER-ILS, 2 (2RT2) (Ref. AMM TASK 34-36-31-000-001) and (Ref. AMM TASK 34-36-31-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the ILS RECEIVER OUT PORT 2 bus from the ILS receiver 2 (2RT2) to the first terminal block (Ref. ASM 34-36/01) .
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060,
A. If the test gives the maintenance message FWC 2 : NO DATA FROM MMR 2:
- replace the MMR-2 (40RT2) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
(1) If the fault continues:
- do a check and repair the wiring of the ILS RECEIVER OUT PORT 2 bus from the MMR receiver 2 (40RT2) to the first terminal block (Ref. ASM 34-36/01) .
**ON A/C ALL
B. Do the test given in Para. 3.B.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 237
May 01/05 CES TASK 34-36-00-810-816 Loss of the G/S and LOC Indications on the CAPT PFD
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-00-810-845 Loss of the ILS1 (MMR1) Output Bus by the DMC 1 31-63-00-810-861 Loss of the ILS1 (MMR1) Output Bus by the DMC 3
3. Fault Confirmation
__________________
A. Test
Not applicable, the fault is evident.
4. Fault Isolation
_______________
A. If the G/S and LOC indications do not come into view on the CAPT PFD:
- do a check of the position of the EIS DMC selector switch on the SWITCHING panel (8VU).
(1) If the EIS DMC selector switch is at NORM or F/O/3:
- refer to the procedure (Ref. TASK 31-63-00-810-845).
(2) If the EIS DMC selector switch is at CAPT/3:
- refer to the procedure (Ref. TASK 31-63-00-810-861).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 238
May 01/05R
CES TASK 34-36-00-810-817 Loss of the G/S and LOC Indications on the F/O ND
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-00-810-853 Loss of the ILS1 (MMR1) Output Bus by the DMC 2 31-63-00-810-861 Loss of the ILS1 (MMR1) Output Bus by the DMC 3
3. Fault Confirmation
__________________
A. Test
Not applicable, the fault is evident.
4. Fault Isolation
_______________
A. If the G/S and LOC indications do not come into view on the F/O ND:
- do a check of the position of the EIS DMC selector switch on the SWITCHING panel (8VU).
(1) If the EIS DMC selector switch is at NORM or CAPT/3:
- refer to the procedure (Ref. TASK 31-63-00-810-853).
(2) If the EIS DMC selector switch is at F/O/3:
- refer to the procedure (Ref. TASK 31-63-00-810-861).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 239
May 01/05R
CES
TASK 34-36-00-810-818
Loss of the G/S and LOC Indications on the CAPT PFD and F/O ND
中國(guó)航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 導(dǎo)航 NAVIGATION 2(110)
