40RT2)
ASM 34-36/01
3. Fault Confirmation
__________________
R **ON A/C 001-004, 051-060,
A. Do the operational test of the ILS (Ref. AMM TASK 34-36-00-710-001).
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060,
A. Do the operational test of the ILS (Ref. AMM TASK 34-36-00-710-003).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 263
May 01/05 CES 4. Fault Isolation
_______________
A. Table of the circuit breakers used in this procedure:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 001-004, 051-060,
49VU NAV/ILS/1 1RT1 G12
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060,
49VU NAV/MMR/1 42RT1 G12
R **ON A/C 001-004, 051-060,
B. If there is no identification signal on the loud speakers with the circuit breaker (1RT1) open:
- replace the RECEIVER-ILS, 2 (2RT2) (Ref. AMM TASK 34-36-31-000-001) and (Ref. AMM TASK 34-36-31-400-001).
(1) If the fault continues:
- replace the AMU (1RN) (Ref. AMM TASK 23-51-34-000-001) and (Ref. AMM TASK 23-51-34-400-001).
(2) If the fault continues:
- do a check and repair the wiring of the AUDIO OUTPUT bus from the ILS receiver 2 (2RT2) to the AMU (1RN) (Ref. ASM 34-36/01).
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060,
B. If there is no identification signal on the loud speakers with the circuit breaker 42RT1 open:
- replace the MMR-2 (40RT2) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
(1) If the fault continues:
- replace the AMU (1RN) (Ref. AMM TASK 23-51-34-000-001) and (Ref. AMM TASK 23-51-34-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 264
May 01/05 CES (2) If the fault continues:
- do a check and repair the wiring of the AUDIO OUTPUT bus from the MMR receiver 2 (40RT2) to the AMU (1RN) (Ref. ASM 34-36/01).
**ON A/C ALL
C. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page 265
May 01/05R
CES
R **ON A/C 001-004, 051-060,
TASK 34-36-00-810-832
ILS1 Test cannot be started
1. Possible Causes
_______________
- RECEIVER-ILS, 1 (2RT1)
- LGCIU-1 (5GA1)
- FMGC-1 (1CA1)
- wiring from the ILS receiver 1 (2RT1) to the LGCIU1(5GA1)
- wiring from the ILS receiver 1 (2RT1) to the FMGC1(1CA1)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 32-31-71-000-001 Removal of the LGCIU (5GA1, 5GA2)
AMM 32-31-71-400-001 Installation of the LGCIU (5GA1, 5GA2)
AMM 34-36-00-740-002 BITE Test of the ILS
AMM 34-36-31-000-001 Removal of the ILS Receiver (2RT1,2RT2)
AMM 34-36-31-400-001 Installation of the ILS Receiver (2RT1,2RT2)
ASM 34-36/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the ILS (system 1) (Ref. AMM TASK 34-36-00-740-002).
4. Fault Isolation
_______________
A. If the test gives the maintenance message LGCIU1(5GA1)/FMGEC1(1CA1)/ILS1 (1RT1):
- do a check for a short to ground at pins AB/15D, 1C of the RECEIVER-ILS, 1 (2RT1) (Ref. ASM 34-36/01).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 2(119)
