- do the ADIRS start procedure (Ref. AMM TASK 34-10-00-860-002).
(b) If the ADIRU 2 is ON:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 001-049, 101-105, 107-107, 151-199, ∞∞49-00-81∞∞∞∞∞∞∞∞∞∞Page B267
201-210, Config-1 Aug 01/05 CES
TASK 49-00-81-810-895
APU EGT indication replaced by amber XX (131-9(A))
1. Possible Causes
_______________
- ECB (59KD)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 49-00-00-710-010 Operational Test of the APU (131-9(A)) AMM 49-61-34-000-003 Removal of the Electronic Control Box (ECB) (131-9(A)) AMM 49-61-34-400-003 Installation of the Electronic Control Box (ECB) (131-9(A))
3. Fault Confirmation
__________________
A. Do the operational test of the APU (Ref. AMM TASK 49-00-00-710-010).
(1) Do a check of the APU EGT indication on the lower ECAM DU (APU Page).
4. Fault Isolation
_______________
A. If the APU EGT indication is replaced by amber XX:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 001-049, 101-105, 107-107, 151-199, ∞∞49-00-81∞∞∞∞∞∞∞∞∞∞Page B268
201-210, Config-1 Aug 01/05 CES
TASK 49-00-81-810-896
APU Speed (N) indication replaced by amber XX (131-9(A))
1. Possible Causes
_______________
- ECB (59KD)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 49-00-00-710-010 Operational Test of the APU (131-9(A)) AMM 49-61-34-000-003 Removal of the Electronic Control Box (ECB) (131-9(A)) AMM 49-61-34-400-003 Installation of the Electronic Control Box (ECB) (131-9(A))
3. Fault Confirmation
__________________
A. Do the operational test of the APU (Ref. AMM TASK 49-00-00-710-010).
(1) Do a check of the APU SPEED (N) indication on the lower ECAM DU (APU Page).
4. Fault Isolation
_______________
A. If the APU SPEED (N) indication is replaced by amber XX:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 001-049, 101-105, 107-107, 151-199, ∞∞49-00-81∞∞∞∞∞∞∞∞∞∞Page B269
201-210, Config-1 Aug 01/05 CES
TASK 49-00-81-810-897
APU Master Switch ON Legend inoperative (131-9(A))
1. Possible Causes_______________
2. Job Set-up Information______________________ Not Applicable
3. Fault Confirmation__________________
A. Test
(1) Push the APU Master SW p/bsw and check that the ON legend comes on.
(2) Release the APU Master SW p/bsw.
4. Fault Isolation_______________
A. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 001-049, 101-105, 107-107, 151-199, ∞∞49-00-81∞∞∞∞∞∞∞∞∞∞Page B270
201-210, Config-1 Aug 01/05 CES
TASK 49-00-81-810-898
APU Start Switch ON Legend inoperative (131-9(A))
1. Possible Causes_______________
2. Job Set-up Information______________________ Not Applicable
3. Fault Confirmation__________________
A. Test
(1) Release the BAT1 and BAT2 p/bsw to the OFF position.
(2) Push the APU Master SW p/bsw and wait until the air-intake flap is in the open position. 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 2(137)
