_
- do a check of the aircraft wiring from the ECB (59KD) AB/G8 to the IGV ACTUATOR (P21) P21/4 (Ref. ASM 49-61/01).
c If the fault continues:
_
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
(b) If the IGV linkage is damaged and/or does not move freely:
- replace the APU (4005KM) (Ref. AMM TASK 49-11-11-000-004) and (Ref. AMM TASK 49-11-11-400-004).
**ON A/C 001-049, 101-105, 151-199, 201-210,
Post SB 49-1062 For A/C 001-049,101-105,151-154,201-207,
A. If an APU auto shutdown occurs during the APU operation and the APU SHUTDOWN report gives the maintenance message:
NO ACCELERATION
CHECK IGV ASSEMBLY/IGV ACTUATOR (8014KM)
associated with Fault Code Number (FCN) 83
- do a check for damage/leakage of the fuel supply and return lines of the IGV ACTUATOR (8014KM)
(1) If there is damage/leakage in the fuel supply and return lines:
- do a repair
(2) If the fuel supply and return lines are OK:
- do a check for damage of the IGV linkage:
(a) If the IGV linkage is OK:
- do a check for damage/contamination of the electrical connector P21 of the ICV ACTUATOR (8014KM)
1 If the electrical connector P21 is damaged/contaminated:
_
- do a repair/cleaning. 2 If the electrical connector P21 is OK:
_
- use a multimeter to do the resistance a check across pin 4 and pin 10 of the IGV ACTUATOR (8014KM).
a If the resistance value is < 100 kOhms:
_
- replace the IGV ACTUATOR (8014KM) (Ref. AMM TASK 49-23-51-000-004) and (Ref. AMM TASK 49-23-51-400-004).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 107-107, 151-199, ∞∞49-00-81∞∞∞∞∞∞∞∞∞∞Page A231
201-210, Config-1 Aug 01/05 CES b If the resistance value is > 100 kOhms:
_
- do a check of the aircraft wiring from the ECB (59KD) AB/G8 to the IGV ACTUATOR (8014KM) P21/4 (Ref. ASM 49-61/01).
c If the fault continues:
_
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
(b) If the IGV linkage is damaged and/or does not move freely:
- replace the APU (4005KM) (Ref. AMM TASK 49-11-11-000-004) and (Ref. AMM TASK 49-11-11-400-004).
R **ON A/C 001-049, 101-105, 107-107, 151-199, 201-210,
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 107-107, 151-199, ∞∞49-00-81∞∞∞∞∞∞∞∞∞∞Page A232
201-210, Config-1 Aug 01/05 CES
TASK 49-00-81-810-841
APU AUTO SHUTDOWN - NO ACCELERATION, Flow-Divider Solenoid Fault (131-9(A))
1. Possible Causes
_______________
- FLOW DIVIDER SOLENOID SHOWS CIRCUIT FAILURE
- damage/contamination of the electrical connector P13
- FLOW-DIVIDER SOLENOID (P13)
- aircraft wiring
- ECB (59KD)
- FLOW-DIVIDER SOLENOID (8025KM)
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific multimeter
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 49-00-00-860-008 APU Start by External Power (131-9(A)) AMM 49-32-13-000-001 Removal of Flow Divider and Solenoid Valve (8024KM) (131-9(A)) AMM 49-32-13-400-001 Installation of Flow Divider and Solenoid Valve (8024KM) (131-9(A)) AMM 49-61-34-000-003 Removal of the Electronic Control Box (ECB) (131-9(A)) AMM 49-61-34-400-003 Installation of the Electronic Control Box (ECB) (131-9(A)) ASM 49-61/01
3. Fault Confirmation
__________________
A. Read-out of ECB Trouble-Shooting Data
(1) Put the APU MASTER SW to the ON position.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 2(84)
