B. If the APU GND SCANNING menu gives the maintenance message:
SPEED SENSOR P26
associated with Fault Code Number (FCN) 9 or 10
- do a check for damage/contamination of the electrical connector P26 of the SPEED SENSORS 1 / 2.
(1) If the electrical connector of the SPEED SENSORS 1 and/or 2 is damaged/contaminated:
- do a repair/cleaning.
(2) If the electrical connector are OK:
- use a multimeter to do a resistance check of the electrical connector P26 across pin 1/pin 2 and pin 5 for the SPEED SENSOR 1 and pin 3/pin 4 and pin 5 for the SPEED SENSOR 2.
(a) If the resistance is < 100 kOhms:
- replace the SPEED SENSOR 1 and/or 2 (Ref. AMM TASK 49-71-13-000-003) and (Ref. AMM TASK 49-71-13-400-003).
(b) If the resistance is OK:
- do a check and repair of the aircraft wiring from the ECB (59KD) AB/E6,E7 to the electrical connector P26/1,2 (SPEED SENSOR 1) and the ECB (59KD) AB/D3,D4 to the electrical connector P26/3,4 (SPEED SENSOR 2) (Ref. ASM 49-61/01).
1 If the fault continues:
_
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 107-107, 151-154, ∞∞49-70-00∞∞∞∞∞∞∞∞∞∞Page 203
201-207, Config-2 Aug 01/05 CES
R **ON A/C 001-049, 101-105, 151-199, 201-210,
R Post SB 49-1062 For A/C 001-049,101-105,151-154,201-207,
A. If the APU GND SCANNING menu gives the maintenance message:
SPEED SENSOR (8060KM)
associated with Fault Code Number (FCN) 7 or 8
- do a check for damage/contamination of the electrical connector P26 of the SPEED SENSOR (8060KM)
(1) If the electrical connector of the SPEED SENSORS 1 and/or 2 is damaged/contaminated:
- do a repair/cleaning.
(2) If the electrical connector are OK:
- use a multimeter to do a resistance check of the electrical connector across pin 1 and pin 2 for the SPEED SENSOR 1 and pin 3 and pin 4 for the SPEED SENSOR 2.
(a) If the resistance is > 25 Ohms:
- replace the SPEED SENSOR (8060KM) (Ref. AMM TASK 49-71-13-000-003) and (Ref. AMM TASK 49-71-13-400-003).
(b) If the resistance is OK:
- do a check and repair of the aircraft wiring from the ECB (59KD) AB/E6,E7 to the electrical connector P26/1,2 (SPEED SENSOR 1) and the ECB (59KD) AB/D3,D4 to the electrical connector P26/3,4 (SPEED SENSOR 2) (Ref. ASM 49-61/01).
1 If the fault continues:
_
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
B. If the APU GND SCANNING menu gives the maintenance message:
SPEED SENSOR (8060KM)
associated with Fault Code Number (FCN) 9 or 10
- do a check for damage/contamination of the electrical connector P26 of the SPEED SENSOR (8060KM)
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 151-199, 201-210, ∞∞49-70-00∞∞∞∞∞∞∞∞∞∞Page 204
Config-2 May 01/05 CES
(1) If the electrical connector of the SPEED SENSOR (8060KM) is damaged/contaminated:
- do a repair/cleaning.
(2) If the electrical connector are OK:
- use a multimeter to do a resistance check of the electrical connector P26 across pin 1/pin 2 and pin 5 for the SPEED SENSOR 1 and pin 3/pin 4 and pin 5 for the SPEED SENSOR 2.
(a) If the resistance is < 100 kOhms:
- replace the SPEED SENSOR (8060KM) (Ref. AMM TASK 49-71-13-000-003) and (Ref. AMM TASK 49-71-13-400-003).
(b) If the resistance is OK:
- do a check and repair of the aircraft wiring from the ECB (59KD) AB/E6,E7 to the electrical connector P26/1,2 (SPEED SENSOR 1) and the ECB (59KD) AB/D3,D4 to the electrical connector P26/3,4 (SPEED SENSOR 2) (Ref. ASM 49-61/01).
1 If the fault continues:
_
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-003) and (Ref. AMM TASK 49-61-34-400-003).
R **ON A/C 001-049, 101-105, 107-107, 151-199, 201-210,
C. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 107-107, 151-199, ∞∞49-70-00∞∞∞∞∞∞∞∞∞∞Page 205
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 機載輔助動力 2(160)
