BEARING SUPPORT HINGE
ZERK FWD
BMS 3-33
(1 LOCATION FOR EACH HINGE, 4 HINGES FOR EACH
1 POINT WING) 2
D
Aileron Lubrication
Figure 301 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-22-11
 ALL  ú ú 01 Page 303 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500
MAINTENANCE MANUAL

AILERON WING QUADRANT
ROD END BEARINGS 
FLUSH 
BMS 3-33  FWD  INBD 
(2 LOCATIONS) 
2 POINTS 
E 
BALANCE 
PANEL 
HINGE SEAL 
HINGE PINS 
MIL-L-7870 
OR 
MIL-L-7808 
(4 LOCATIONS) 
4 POINTS 
F 
Aileron Lubrication 
Figure 301 (Sheet 3) 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-22-11
 ALL  ú ú 01 Page 304 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SEE G
FWD INBD POWER OUTPUT LEVER ASSEMBLY
FLUSH
BMS 3-33
(1 AT EACH LOCATION)
1 POINT 
G 
Aileron Lubrication 
Figure 301 (Sheet 4) 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-22-11
 ALL  ú ú 01 Page 305 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 TASK 12-22-11-603-007
 3.  Aileron Power Output Lever Assembly Lubrication_______________________________________________
 A. Consumable Materials
 (1)
D00633 Grease - BMS 3-33 (Recommended)

 (2)
D00013 Grease - MIL-G-23827 (Alternate)

 B. Access
 (1)  Location Zone
 216 Main Wheel Well, LH

 C. Procedure
 S 013-008
 (1)
Remove the necessary parts to get access to the grease fittings.

 S 643-006

 (2)
Lubricate the aileron power output assembly (Fig. 301).

 (3)
Install all the parts removed to get access to the grease fittings.

 S 413-009
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-22-11
 ALL  ú ú 02 Page 306 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 RUDDER LUBRICATION - SERVICING
______________________________
 TASK 12-22-21-643-001
 1. Rudder Lubrication
__________________
 A. Consumable Materials
 (1)  
D00633 Grease - BMS 3-33 (Recommended)

 (2)  
D00013 Grease - MIL-G-23827 (Alternate)

 (3)  
D00015 Grease - BMS 3-24

 B. References
 (1)  
AMM 27-09-83/801, Flight Control Hinge Bearing Dust Seals

 (2)  
AMM 27-21-00/201, Rudder and Rudder Trim Control System

 C. Access
 (1)  
Location Zones
 706 Vertical Stabilizer
 708 Rudder

 (2)  
Access Panels
 9509L TE Access Panel
 9511R TE Thrust Rib Access Panel
 9556L Cover - Rudder Nose
 9560L Cover - Rudder Nose
 9562L Cover - Rudder Nose
 9564L Cover - Rudder Nose
 9566L Cover - Rudder Nose
 9568L Cover - Rudder Nose

 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 SERVICING(95)