(k)  
Push it until the handle is closed.

 (l)  
Make sure the force that is necessary to close the handle is not more than 45 pounds.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-00
 ALL  ú ú 20 Page 553 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (m)  
Pull the master latch lock handle open.

 (n)  
See that the pressure relief doors open and the linkage moves smoothly.

 (o)  
Put the external control switch in the DOOR OPEN position.

 CAUTION: YOU MUST PERMIT A ONE MINUTE TIME DELAY AFTER YOU OPEN OR
_______ CLOSE THE DOOR TO LET THE MOTOR TO COOL. DAMAGE TO THE MOTOR CAN OCCUR IF NO TIME DELAY IS PERMITTED.
 CAUTION:_______IN CASE THE DOOR DOES NOT OPEN, STOP IMMEDIATELY. DO NOT OPERATE THE DOOR CONTROL SWITCH. HOLDING THE DOOR CONTROL SWITCH MAY DAMAGE THE ACTUATOR. WAIT AT LEAST 1 MINUTE BEFORE SECOND ATTEMPT. IF THE DOOR STILL DOES NOT OPEN, WAIT AT LEAST 10 MINUTES BEFORE THIRD ATTEMPT.
 (p)  
Make sure the cargo door fully opens in less than 35 seconds.

 (q)  
Do a check of the door warning system as follows: 1) Push and hold the plunger on the door latched switch for at least one minutute.

 2)  Make sure the applicable status message shows on the EICAS display:
 NOTE: The status message shows after you hold the plunger
____
 for more than one minute.

 a)  DOOR FWD CARGO
 b) DOOR AFT CARGO. 3) Release the plunger on the door latched switch. 4) Erase the status message from the EICAS display. 5) Push and hold the plunger on the door closed switch for at
 least one minute. 6) Make sure the applicable status message shows on the EICAS display:
 NOTE: The status message shows after you hold the plunger
____
 for more than one minute.

 a)  DOOR FWD CARGO
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-00
 ALL  ú ú 20 Page 554 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 b)  DOOR AFT CARGO.
 7)  Release the plunger on the door closed switch.
 8)  Erase the status message on the EICAS display.
 9)  Push and hold the plunger on the door warning switch for at least one minute.
 10) Make sure the applicable status message shows on the EICAS display:
 NOTE: The status message shows after you hold the plunger
____
 for more than one minute.

 a)  DOOR FWD CARGO
 b)  DOOR AFT CARGO.
 11) Release the plunger on the door warning switch.
 12) Erase the status message from the EICAS display.
 13) Move the door until it is open between 1 and 2 feet.
 14) Push and hold the plungers of the Door Warning Switch, the Door Latched Switch and the Door Closed Switches.
 NOTE: During the subsequent steps you will release the
____ plunger of each switch individually. Continue to hold the plungers of the other two switches when the first switch plunger is released. This will do a test of the door latched, door closed and door warning circuits.
 15) Release the plunger of the Door Latched Switch.
 NOTE: This does a test of the door latched circuit.
____
 16) See that the applicable caution message shows on EICAS. a) DOOR FWD CARGO b) DOOR AFT CARGO
 17) Push and hold the plunger of the Door Latched Switch.
 18) See that the applicable caution message does not show on EICAS. a) DOOR FWD CARGO
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-00
 ALL  ú ú 15 Page 555 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 b) DOOR AFT CARGO
 19) Release the plunger of the Door Closed Switch.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 3(26)