BOLT 
BOLT 
WASHER  STRIKER BRACKET 
WASHER 
E 
E 

RETAINING
CLIP

RETAINING CLIP
E E
RETAINING CLIP INSTALLED RETAINING CLIP INSTALLED AT BRACKET LOCATIONS AT ALL OTHER LOCATIONS (EXAMPLE) (EXAMPLE)
H H
BMS 5-95
NOTE:____  EVEN NUMBER FITTING IS OPPOSITE DIRECTION. ODD NUMBER LATCH FITTINGS SHOWN, 
30-35 POUND-INCHES (3.39-3.95 Nm). APPLY BMS 5-95 TO COVER THE BOLT HEAD AND ANCHOR NUT AFTER THE BOLT IS TORQUED TO  BOLT AND NUT SEALING E-E 
Figure 405 (Sheet 6) Forward/Aft Cargo Door 

L47695
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-01
 ALL  ú ú 04 Page 414 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (c)  Pull the end hinge pin (16 and 19) from the hinge section.
 NOTE: The forward and aft end hinge pins are of different
____ lengths. Identify the pins with a tag for the installation procedure.
 (d)  Use a punch (drift) to remove the two remaining 9.06-inch length center hinge pins (18 and 17).
 NOTE: On the forward cargo door, use the punch to move the
____ hinge pin (18) in the aft direction from the forward end.
 On the aft cargo door, use the punch to move the hinge pin (17) in the forward direction from the aft end.
 (e)  Use a punch (drift) to remove the four remaining 8.06-inch length center hinge pins (17 and 18).
 NOTE: On the forward cargo door, use the punch to move the
____ hinge pin (17) in the forward direction from the aft end.
 On the aft cargo door, use the punch to move the hinge pin (18) in the aft direction from the forward end.
 S 024-012
 (11)
 Remove the cargo door from the airplane and put the door in the transport dolly.

 S 494-013

 (12)
 Install the safety barrier.

 TASK 52-34-01-404-014
 3. Forward/Aft Cargo Door - Installation
_____________________________________
 A. Special Tools and Equipment
 (1)  
30HME65B04308-1 Sling - Fwd and Aft Cargo Doors

 (2)  
TME65B04308-1 Dolly - Cargo and Main Entry Door

 (3)  
2TME65B04308-1 Dolly - Forward and Aft Lower Lobe Cargo Door (optional to TME65B04308-1)

 (4)  
MIT61B04102-1 Dummy Latch Pin Set, Lower Lobe Cargo Door

 (5)  
3PRE65B00040-1 Safety Barrier, Forward Cargo Door

 (6)  
3PRE65B00040-14 Safety Barrier, Aft Cargo Door

 (7)  
D0137-030, Safety Barrier, United Fabricators, Inc. (equivalent to 3PRE65B00040-1, -14)

 B.
Standard Tools and Equipment

 (1)  
Meter - Capable of measuring 1 ohm

 C.
Consumable Materials

 (1)  
G02020 Clay - Modeling

 (2)  
D00013 Grease - MIL-G-23827

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-01
 ALL  ú ú 04 Page 415 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (3)  
D00250 Jelly - Petroleum

 (4)  
B00137 Paper - Abrasive 180 grit

 (5)  
G00000 Cord - Wire bundle shield, 0.25 inch diameter by 11.0 inches MIL-C-5651, Type 1

 (6)  
G00000 Braid - Wire bundle shield cord tying material

 (7)  
A00247 Sealant - BMS 5-95

 (8)  
B01012 Series 92 Solvent

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-01
 ALL  ú ú 04 Page 416 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 3(43)