S 864-122-N00
(3)
For the applicable engine, open this circuit breaker and install the DO-NOT-CLOSE tag:
(a)
P6 Main Power Distribution Panel
1) 6L10 FUEL CONT VALVE ENG 1
2) 6L11 FUEL CONT VALVE ENG 2
3) 6L12 FUEL CONT VALVE ENG 3
4) 6L13 FUEL CONT VALVE ENG 4
S 014-394-N00
(4) Open the left fan cowl panel (AMM 71-11-04/201).
S 044-396-N00
WARNING: DO THE THRUST REVERSER DEACTIVATION PROCEDURE TO PREVENT THE
_______ OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(5) Do this procedure: Thrust Reverser Deactivation for Ground Maintenance (AMM 78-31-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-05
ALL ú ú N01 Page 447 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 014-395-N00
(6) Open the left core cowl panel (AMM 71-11-06/201).
S 014-397-N00
WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU OPEN THE
_______ THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
(7)
Open the left thrust reverser (AMM 78-31-00/201).
E.
Procedure
S 024-442-N00
(1)
Remove the No. 22, 23 or 24 fuel injector and support.
(a)
ENGINES PRE-PW-SB 72-567; If you will remove the No. 22 fuel injector, remove the left diffuser-seal air vent-tube (157) (Fig. 405). 1) Disconnect the tube nut (155) from the fitting on the
diffuser case.
2) Remove the bolt (160) and nut (169) which attach the tube clamp (170) for the signal tube of the air shutoff valve to the bracket (168).
3) Remove the bolt (162) and nut (171) which attach the tube
clamp (163) for the PT4.95 tube to the bracket (168).
4) Remove the bolts (164) which attach the flange of the air
vent tube (157) and the bracket (168) to the HPC rear case.
5) Remove the bolt (159) and nut (158) which attach the tube clamp (156) for the air vent tube (157) to the bracket on the No. 21 fuel injector.
6) Remove the air vent tube (157) from the engine. 7) Remove the deflector (166) from the HPC case. a) Discard the gaskets (165, 167). 8) Install caps on the fitting on the diffuser case and the open port on the HPC rear case.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-05
ALL ú ú N01 Page 448 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(b) ENGINES POST-PW-SB 72-567; If you will remove the No. 22 fuel injector, remove the left diffuser-seal air vent-tube (203) (Fig. 405). 1) Remove the bolt (205) and nut (209) that attach the clamp
(207) of the vent tube for the No. 3 bearing (208).
2) Remove the four bolts (204) that attach the bracket (206) to the flange of the left diffuser-seal air vent-tube (203). a) Remove the bracket (206).
3) Remove the bolt (211) and nut (212) that attach the clamp
(210) of the left diffuser-seal air vent-tube (203). 4) Remove the bolt (218) and nut (216) that attach the clamp
(217) of the PT4.95 pressure tube (219). 5) Remove the bolt (213) and nut (225) that attach the clamp
(214) of the air shutoff valve signal tube (226).
6) Remove the four bolts (220) which attach the flange of the left diffuser-seal air vent-tube (203) and the bracket
(224) to the HPC rear case.
7) Remove the six bolts (204) which attach the flange of the left diffuser-seal air vent-tube (203) to the diffuser case.
8) Carefully remove the left diffuser-seal air vent-tube (203) from the engine.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機燃油和控制 1(61)
