S 714-449-N00
(7)
Do the test of the fuel injector and support as shown in the Power Plant Test Reference Table (AMM 71-00-00/501).
TASK 73-11-05-404-172-N00
12. Install the No. 7, 8, or 9 Fuel Injector and Support (Fig. 401)____________________________________________________
A. Equipment
(1) M303, M305, or M307 Bergen Mechanical Crimper
Bergen Cable Technologies Inc
170 Gregg St
P.O.
Box 1300
Lodi, NJ 07644-9982
B.
Consumable Materials
(1) D00045 Beeswax
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-05
ALL ú ú N01 Page 460 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(2)
D00250 Petrolatum White, VV-P-236
(3)
D00301 Petroleum Jelly, Vaseline
(4)
D00390 Oil - Engine
(5)
G01505 Lockwire - MS20995
(6)
G02332 Ferrule - P05-292 (Optional)
(7)
G02335 Cable - Safety - P05-291 (Optional)
C.
Parts
~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 3 | Packing | 73-11-06 | 30 | 65 | | | 5 | Fuel Injector and Support | 73-11-05 | 05 | 10 | | | 19 | Gasket | | | 20 | | | 20 | Packing | 73-11-06 | 25 | 15 | 2.....….........…...................................…..........…......…........1
D. References
(1)
AMM 71-00-00/501, Power Plant
(2)
AMM 71-11-04/201, Fan Cowl Panels
(3)
AMM 71-11-06/201, Core Cowl Panels
(4)
AMM 75-24-02/401, Turbine-Vane Cooling-Air Duct
(5)
AMM 78-31-00/201, Thrust Reverser System
E.
Access
(1)
Location Zone 412 Engine 1 - Diffuser and Combustor Case 4 o'clock 422 Engine 2 - Diffuser and Combustor Case 4 o'clock 432 Engine 3 - Diffuser and Combustor Case 4 o'clock 442 Engine 4 - Diffuser and Combustor Case 4 o'clock
(2)
Access Panel
416 Right Thrust Reverser Half - Engine 1
426 Right Thrust Reverser Half - Engine 2
436 Right Thrust Reverser Half - Engine 3
446 Right Thrust Reverser Half - Engine 4
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-05
ALL ú ú N01 Page 461 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
F. Prepare for the Installation of the No. 7, 8 or 9 Fuel Injector and Support
S 224-173-N00
(1)
Examine the clearance between the outer diameter of the support (5) and the inner diameter of the diffuser and combustor case boss.
(a)
Make sure the clearance is in the limits that are given in the table below:
~............................................................. | | | NEW PART REFERENCE | CLEARANCE | | | | DIMENSIONS | LIMITS | | PART | | INCHES | INCHES | | NAME | DIA | (MM) | (MM) | | | ............................................... | | | MIN | MAX | MIN | MAX | ............................................................... | SUPPORT | OD | 1.821 | 1.823 | | | | | | (46.254) | (46.304) | 0.001 | 0.005 | ......................................... (0.026) | (0.127) | | CASE | ID | 1.824 | 1.826 | | | | BOSS | | (46.330) | (46.380) | | | 2.........….....…...........…...........…..........…..........1
G. Procedure
S 424-450-N00
(1)
Install the No. 7, 8 or 9 fuel injector and support.
(a)
Remove the protection caps.
(b)
Lubricate the new gasket (19) with the beeswax.
(c)
Put the new gasket (19) on the boss on the diffuser and combustor case.
(d)
Install the fuel injector (5) in the boss on the diffuser and combustor case.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機燃油和控制 1(67)
