(a)  
Lubricate the packing (8) with petrolatum.

 (b)  
Install the packing (8) on the adapter (9).

 (c)  
Lubricate the threads of the adapter (9) with engine oil.

 (d)  
Install the adapter (9) in the fuel bypass valve (7).

 1)  Tighten the adapter (9) to 110-120 pound-inches (12.4-13.6 newton-meters).
 S 424-059-N00
 (2)  
Install the fuel bypass valve:

 (a)  
Remove the caps from the fuel pump, the fuel bypass valve (7) and the fuel tube (2).

 (b)  
Lubricate the packings (6, 15 and 16) with the petrolatum.

 (c)  
Install the fuel bypass valve (7) on the fuel pump: 1) Install the packing (16) in the groove on the end of the fuel tube (2). 2) Install the packings (6 and 15) in the recesses on the inboard side of the fuel pump. 3) Put the end of the fuel tube (2) into the fuel bypass valve

 (7). 4) Put the fuel bypass valve (7) against the fuel pump. 5) Attach the fuel bypass valve (7) to the fuel pump:
 a)  Lubricate the threads of the bolts (13) with engine oil. b) Install the fuel bypass valve (7) to the fuel pump with the bolts (13) and the washers (14).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-11-07
 ALL  ú ú N02 Page 406 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
c)  Tighten the bolts (13) to 85-95 pound-inches (9.6-10.3 newton-meters).
 6)  Attach the fuel tube (2) for the oil cooler inlet to the fuel bypass valve (7): a) Lubricate the threads of the bolts (3) with engine oil. b) Install the fuel tube (2) to the fuel bypass valve (7)
 with the bolts (3). c) Tighten the bolts (3) to 85-95 pound-inches (9.6-10.7 newton-meters).
 (d)  Install the fuel supply tube (11): 1) Remove the caps from the fuel supply tube (11). 2) Lubricate the threads of the adapter (9), fuel metering
 unit, and the tee for the fuel supply manifold with engine
 oil. 3) Put the fuel supply tube (11) in position on the engine. 4) Connect the fuel supply tube (11) to the adapter (9), the
 fuel metering unit, and the tee for the fuel supply manifold. 5) Tighten the tube nut (10) to 200-225 pound-inches (22.6-25.4 newton-meters). 6) Tighten the tube nut (12) to 450-500 pound-inches (50.8-56.5 newton-meters). 7) Tighten the tube nut (17) to 340-375 pound-inches (38.4-42.4 newton-meters). 8) Safety the tube nuts (10, 12, and 17) with lockwire or safety cable and safety cable ferrule.
 F.  Return the Aircraft to its Usual Condition
 S 414-062-N00
 WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU CLOSE THE
_______
 THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS,
 INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.

 (1)  
Close the thrust reversers (AMM 78-31-00/201).

 (2)  
Close the core cowl panels (AMM 71-11-06/201),

 (3)  
Close the fan cowl panels (AMM 71-11-04/201).

 S 444-054-N00

 (4)  
Do the activation procedure for the thrust reversers
 (AMM 78-31-00/201).

 S 864-046-N00

 (5)  
For the applicable engine, remove the DO-NOT-CLOSE tag and close
 this circuit breaker:

 (a)  
P6 Main Power Distribution Panel
 1) 6G01 FUEL SHUTOFF VALVE ENG 1

 S 414-052-N00
 S 414-053-N00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-11-07
 ALL  ú ú N02 Page 407 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
2) 3) 4)  6G02 6G03 6G04  FUEL SHUTOFF VALVE ENG 2FUEL SHUTOFF VALVE ENG 3FUEL SHUTOFF VALVE ENG 4
 (6)  S 864-047-N00Remove the DO-NOT-OPERATE tag from the FUEL CONTROL switch.
 (7)  S 714-061-N00Do the test of the fuel bypass valve that is shown in the Power Plant Test Reference Table (AMM 71-00-00/501).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機燃油和控制 1(92)