Page 7001
21-53-12  JUN 15/10
REFERENCE  QTY  NAME 
No specific No specific  3 4  - zener diode DZX85C9 (Dz) - diode 1N4007 (D) 
No specific  1  Standard tool kit for electronics' specialist 

(2) Consumable Material
(a) Equivalent alternatives may be used for the listed items.
REFERENCE  NAME 
(M14A) LOCTITE 222  Locking compound 
CAF 730 (white)  Sealing compound 
(M26C) AEROSHELL 7  Grease 
RNF100 1/4 NOIRE TYPE1  Heat-shrinking sleeves (black) 
DYNAFAST  Cleaning solvent 
(M05B) LOCTITE AS310 SILICOMET  Bonding compound 
21DRNATUREL  Braid 
(M01D) 6060 BT519 GREEN  Varnish 
(M42B) LOCTITE 574 INSTAJOINT  Sealing compound 
95° ETHYL ALCOHOL  Cleaning fluid 
KRYTOX 240 AZ  Grease 
No specific  Solder (Sn5-Pb93,5-Ag1,5) 
No specific  Solder (Sn63-Pb37) 

Page 7002
21-53-12
(3) Referenced Information
REFERENCE  PAGE BLOCK  DESIGNATION 
(refer to TASK 21-53-12-200-801-A01)  5001  ACTUATOR - CHECKING 
(refer to TASK 21-53-12-920-801-A01)  8001  ACTUATOR - FITS AND CLEARANCES 
(refer to Page Block 10001)  10001  ILLUSTRATED PARTS LIST 
(refer to Page Block 4001)  4001  ACTUATOR - CLEANING 
(refer to TASK 21-53-12-920-802-A01)  8001  ACTUATOR - TORQUE VALUE TABLE 
(refer to TASK 21-53-12-300-803-A01)  6001  REPAIR 03 - ACTUATOR - REPLACEMENT OF MOTOR PARTS 
(refer to Subtask 21-53-12-820-001-A01)  7001  ADJUSTMENT OF THE BRAKE FRAMEWORK OF THE MOTOR (03-610B) 
(Ref. to Fig. 7001)  7001  ACTUATOR - ADJUSTMENT OF THE MOTOR (03-610B) 
(Ref. to Fig. 7002)  7001  ACTUATOR - ADJUSTMENT OF THE MOTOR (03-610A) 
(Ref. to Fig. 7004)  7001  ACTUATOR - CAMS LOCATION 
(refer to Page Block 2001)  2001  SCHEMATIC AND WIRING DIAGRAMS 
(Ref. to Fig. 7005)  7001  ACTUATOR - ADJUSTMENT OF THE CLUTCH ASSEMBLY (02-190) 
(refer to TASK 21-53-12-300-801-A01)  6001  REPAIR 01 - ACTUATOR - REPLACEMENT OF EQUIPPED CASE PARTS 
(refer to TASK 21-53-12-300-802-A01)  6001  REPAIR 02 - ACTUATOR - REPLACEMENT OF EQUIPPED PLATE PARTS 
(Ref. To Fig. 7006)  7001  ACTUATOR - PLAY BETWEEN GEAR OF THE BALL-SCREW AND THE BACK PLATES (02-290), (02-300) 
(Ref. To Fig. 7007)  7001  ACTUATOR - INSTALLATION OF GEARS 
(refer to Subtask 21-53-12-820-003-A01)  7001  ADJUSTMENT OF THE POTENTIOMETER 
(refer to Subtask 21-53-12-820-004-A01)  7001  ADJUSTMENT OF THE CAMS AND SWITCHES 

Page 7003
21-53-12 JUN 15/10
REFERENCE  PAGE BLOCK  DESIGNATION 
(refer to TASK 21-53-12-300-804-A01)  6001  REPAIR 04 - ACTUATOR - REPAIR OF EQUIPPED COVER 
(Ref. To Fig. 1)  0001  ACTUATOR - OVERALL DIMENSIONS 
(Ref. To Fig. 7008)  7001  ACTUATOR - VARNISH AND LOCKWIRES LOCATION 
(refer to TASK 21-53-12-700-801-A01)  1001  ACTUATOR - TESTING 

C.  Job Set-Up Subtask 21-53-12-210-003-A01
(1)  Job before assembly CAUTION: REPAIR OR REPLACE THE PARTS WHICH ARE NOT WITHIN THE LIMITS.
(a)
Do a check of dimension parts (refer to TASK 21-53-12-200-801-A01).

(b)
Do a check of the Fits and Clearance (refer to TASK 21-53-12-920-801-A01).

(c)
Refer to IPL to see if any part has  been modified or superseded by other parts (refer to Page Block 10001).

(d)
Clean parts before assembly (refer to Page Block 4001).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：LIEBHERR-AEROSPACE TOULOUSE SAS COMPONENT MAINTENANCE MANUAL(32)