LIEBHERR AEROSPACE TOULOUSE SAS
COMPONENT MAINTENANCE MANUAL
761A - 761B - 762A SERIES
ILLUSTRATED PARTS LIST
IPL 10001 PAGE 1
21-53-12 JUN 15/10
LIEBHERR AEROSPACE TOULOUSE SAS
COMPONENT MAINTENANCE MANUAL
761A - 761B - 762A SERIES
PAGE INTENTIONALLY BLANK
IPL 10001 PAGE 2
ILLUSTRATED PARTS LIST
TASK 21-53-12-870-801-A01
1. INTRODUCTION
A. General
(1)
The purpose of this illustrated nomenclature is the identification of equipment assemblies, sub-assemblies, and parts.
(2)
It is set up in conformance with the rules set forth in ATA 100.
(3)
From time to time, the illustrated nomenclature is revised so as to incorporate recent additions, cancellations and modifications in equipment. Revisions are indicated by an "R" on the right of each revised line, and apply solely to the date of revision.
B. Use Of The IPL
(1)
Publication format
(a) The IPL is arranged in the following order:
-introduction,
-list of manufacturers (VCI - Vendor Code Index),
-index of circuit symbols (EDI - Equipment Designator Index),
-Alphabetical Index (NI/ALPHA),
-Numerical Index (NI/NUM),
-illustrated nomenclature of spare parts.
(2)
Designation method
(a)
List of manufacturers
1 The list of manufacturers is alphanumerically arranged according to the manufacturer's code. This list includes the names and addresses of all manufacturers cited in the detailed nomenclature.
(b)
Index of circuit symbols
1
This index contains the relevant reference and diagrams for each circuit symbol, as well as the corresponding marker.
2 The circuit symbol designation is alphanumerical, and is arranged in the following order:
-dash,
-letters from A thru Z,
-numerals from 0 thru 9.
INTRO 10001 Page 1
21-53-12 JUN 15/10
(c) Alphabetical index
1
The manufacturer's reference designation (Part Number) is alphanumerical, and is arranged in the following order:
-dash,
-letters from A thru Z,
-numerals from 0 thru 9.
2 With this index, it must be understood that a manufacturer's reference (PN) cannot begin otherwise than with a letter.
(d) Numerical index
1 The manufacturer's reference designation (PN) is alphanumerical, and is arranged in the following order:
-dash,
-letters from A thru Z,
-numerals from 0 thru 9.
2 In this index, it must be understood that the manufacturer's reference (PN) can only begin with a numeral.
(3)
Manufacturer's is reference (PN)
(a)
The manufacturer's reference (PN) are published in compliance with:
-standards and official specifications now in effect (AFNOR, BNAE, UTE, etc.),
-instructions from the different manufacturers,
-requirements as set forth in ATA 200.
(b)
For the non-specific components, the 12 or 15-number reference has been added in the designation text, excluding nomenclatures furnished via computer.
(4)
Identification of a component part
(a) There are several different ways to identify a component part.
1 Through the indexes: a Knowing the manufacturer's reference (Part Number). b The manufacturer's reference indexes contain the following information about the
reference:
-
the reference of the part specific to the airline (column left blank),
-
the illustrated catalog sequence number (CSN),
