曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (5)  S 492-073Hold the target in place with a spring loaded clamp or other method.
 (6)  S 342-074Make sure the adhesive is not pushed from the joint.
 (7)  S 822-075Do this adjustment - Adjustment Proximity Sensors for the Nose Landing Gear, Door closed sensors.
 (8)  S 712-076Do this test: Test of the proximity sensor for the nose landing gear for the door closed sensors.
 (9)  S 942-079Put the airplane back to its usual condition.

 

 32-61-03
 ALL  ú ú 01 Page 219 ú Dec 20/96
 
A

757
MAINTENANCE MANUAL

TABLE 1
BONDING NOTES:
1.  
BOND LINE THICKNESS MAXIMUM 0.020 INCH

2.  
USE LIGHT POSITIVE CLAMPING PRESSURE

3.  
USE A HEAT LAMP AND ENVIRONMENTALLY CONTROLLED WORK AREA TO ACHIEVE THE TEMPERATURES LISTED IN TABLE 1.

Nose Gear Door Target Adhesive Bonding Time
Figure 205

 

 32-61-03
 ALL  ú ú 01 Page 220 ú Jun 20/96
 
F27268

 

 

　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 起落架 CHAPTER 32 - LANDING GEAR 3(171)