(2)
AMM 20-10-01/401, E/E Rack-Mounted Components
(3)
AMM 20-41-01/201, Electrostatic Sensitive Devices
(4)
AMM 24-22-00/201, Electrical Power - Control
(5)
AMM 25-50-03/401, Bulkhead Lining
(6)
AMM 29-11-00/201, Pressurize/Depressurize Main Hydraulic Systems
(7)
AMM 34-21-00/501, Inertial Reference System
B.
Access
(1)
Location Zones
211 Control Cabin, Left
212 Control Cabin, Right
821 Forward Cargo Door
C.
Procedure
S 864-070
(1)
Open these circuit breakers on the overhead circuit breaker panel, P11, and attach DO-NOT-CLOSE tags:
(a)
11C31, ANTI-SKID 2-6
(b)
11C32, ANTI-SKID 3-7
(c)
11S14, AUTOBK ANTISKID TEST IND 1
(d)
11S18, ANTI-SKID 1-5
(e)
11S21, AUTOBK ANTISKID TEST IND 2
(f)
11S22, ANTI-SKID 4-8
(2)
Open the forward cargo door, 821 (AMM 06-46-00/201).
S 014-027
32-42-01
ALL ú ú 09 Page 401 ú Sep 28/01
A
757
MAINTENANCE MANUAL
E5 RACK
FWD CARGO DOOR, 821
SEE A MAIN EQUIPMENT ANTISKID/AUTOBRAKECENTER (REF)
CONTROL UNIT E5 RACK ACCESS PANEL
SEE B
ANTISKID/AUTOBRAKECONTROL UNIT M102
MAIN WHEEL CARD
(4 PLACES)
COVER
BITE (REF)
CARD
MOUNTING TRAY
(REF)
FWD
HOLD DOWN
EXTRACTOR
INBD MECHANISM) (SELF-LOCKING CARD AUTOBRAKE
(REF)
A AUTOBRAKE ANTISKID/ INTERFACE/
CONTROL DISPLAY CARD
UNIT M102
B
Antiskid/Autobrake Control Unit and Circuit Card Installation
Figure 401
32-42-01
ALL ú ú 03 Page 402 ú Mar 15/87
A
757 MAINTENANCE MANUAL
S 014-022
(3) Remove the access panel from the E5 rack
NOTE: The access panel is on the forward bulkhead of the
____ forward cargo compartment, just forward of the forward cargo door, 821.
S 014-023
(4) Find the antiskid/autobrake control unit on the E5 rack.
S 914-013
CAUTION: DO NOT TOUCH THE ANTISKID/AUTOBRAKE CONTROL UNIT BEFORE YOU DO
_______ THE PROCEDURE FOR DEVICES THAT ARE SENSITIVE TO ELECTROSTATIC DISCHARGE. ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE ANTISKID/AUTOBRAKE CONTROL UNIT.
(5)
Do the procedure for devices that are sensitive to electrostatic discharge (AMM 20-41-01/201).
S 024-018
(6)
Remove the unit (AMM 20-10-01/401) from the E5 rack.
TASK 32-42-01-404-021
3. Antiskid/Autobrake Control Unit - Installation (Fig. 401)
______________________________________________
A. References
(1)
AMM 20-10-01/401, E/E Rack-Mounted Components
(2)
AMM 20-41-01/201, Electrostatic Sensitive Devices
(3)
AMM 24-22-00/201, Electrical Power - Control
(4)
AMM 29-11-00/201, Pressurize/Depressurize Main Hydraulic Systems
(5)
AMM 34-21-00/501, Inertial Reference System
B.
Access
(1)
Location Zones
211 Control Cabin, Left
212 Control Cabin, Right
821 Forward Cargo Door
C.
Procedure
S 914-019
CAUTION: DO NOT TOUCH THE ANTISKID/AUTOBRAKE CONTROL UNIT BEFORE YOU DO
_______ THE PROCEDURE FOR DEVICES THAT ARE SENSITIVE TO ELECTROSTATIC DISCHARGE. ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE ANTISKID/AUTOBRAKE CONTROL UNIT.
(1) Do the procedure for devices that are sensitive to electrostatic discharge (AMM 20-41-01/201).
32-42-01
ALL ú ú 06 Page 403 ú Sep 28/01
A
757
MAINTENANCE MANUAL
S 424-083
(2)
Install the unit on the E-5 rack (AMM 20-10-01/401).
S 864-062
(3)
Remove the DO-NOT-CLOSE tags and close these circuit breakers on the P11 panel:
(a)
11C31, ANTI-SKID 2-6
(b)
11C32, ANTI-SKID 3-7
(c)
11S14, AUTOBK ANTISKID TEST IND 1
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 起落架 CHAPTER 32 - LANDING GEAR 3(23)
