曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

The CAS is moved to a window on the right side of the display. CAS messages are treated in the same way as they are during normal display. Messages are prioritized by criticality.
CASWindowEIS DisplayFigure 3-2 Reversionary Mode
190-00494-02 Rev. B Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 83
Engine Indication ndication & Crew Alerting System ystem
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS EICAS AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE AFCS ADDITIONAL
FEATURES APPENDICES INDEX
3.1 Engine Indicationndication Systemystem (EIS)
Figure 3-3 EICAS Display (Normal Mode)12345678910Figure 3-4 EIS Display (Reversionary Mode)1235678101Engine Fan Rotation Speed2Oil Pressure and Temperature3Fuel Display4CAS Display (refer to Section 3.2)5Interstage Turbine Temperature6Engine High Pressure Turbine Rotation Speed7Electrical Display8Pressurization Display9Trim Indicator10Flap Indicator
84 Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 190-00494-02 Rev. B
Engine Indication ndication & Crew Alerting System ystem
SYSTEM
OVERVIEW
FLIGHT
AUDIO PANEL EICAS INSTRUMENTS
& CNS
FLIGHT
MANAGEMENT
HAZARD
ADDITIONAL AFCS AVOIDANCE
INDEX APPENDICES FEATURES
EIS information is presented using horizontal and vertical bar indicators and digital readouts. Green ranges on the instrument scales indicate normal ranges of operation; yellow and red bands indicate caution and warning, respectively. During normal operating conditions, an instrument’s pointer appears in white or green and readout text is green. Refer to each instrument description for additional details on display behavior.
When an unsafe operating condition occurs, the pointer and readout color change to indicate a caution (yellow) or warning (red). If the time limit for an unsafe condition is exceeded, the color of the sliders, pointers, and digits may change to denote an increase in priority level, even if the parameter is still within in the lower priority condition range. If sensor data for a parameter becomes invalid or unavailable, a red “X” is displayed across the indicator and/or readout.
Figure 3-5 Indicators and Exceedance LevelsPointer (Exceedance)Normal BandExceedance LevelsPointer (Normal)Slider (Exceedance)Exceedance LevelsSlide (Normal)
Engine Stagetagetage Rotationotationotationotation Speeds (N1 and N2)
The N1 display (Figure 3-6) indicates the engine fan rotation speeds while the N2 readouts (Figure 3-7) show the engine high pressure turbine rotation speeds. Both are shown as percentages. The N1 and N2 displays are shown in the same format in reversionary mode.
The N1 display ranges from 20 to 110% of maximum rotational speed. Values and limits are obtained from the Full Authority Digital Engine Controller (FADEC). When the N1 values of the engines are synchronized, ‘SYNC’ appears in green between the readouts below the scale. If N1 drops below 20%, the sliders are removed from the scale while the readouts remain displayed below.
An N1 target based on the indicated Thrust Mode is shown for each engine by a bug along the scale. The readout in the box at the top of the scale is the minimum N1 target value for both engines. When the Thrust Lever Angle (TLA) position corresponds to the indicated Thrust Mode (Table 3-1), the indication is shown in green; otherwise, the indication appears in white.
IndicationThrust ModeCRUCruiseCLBMax ClimbT/OTakeoffTable 3-1 Thrust ModesN1 Values SynchronizedN1 TargetBugN1 Target ValueWarning LineFigure 3-6 N1 DisplayThrust ModeFigure 3-7 N2 Display
The N2 readouts are located beneath the ITT display. At engine start, the readouts appear in white. Once normal operating conditions are reached, the readouts change to green.
190-00494-02 Rev. B Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 85
Engine Indication ndication & Crew Alerting System ystem
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS EICAS AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE AFCS ADDITIONAL
FEATURES APPENDICES INDEX
Oil Pressure and Temperatureemperature
The oil pressure and temperature for each engine are shown below the N1 display under normal display operating conditions. Oil pressure is shown in pounds per square inch (psi) and temperature in degrees Celsius (°C). When oil pressure and temperature are in the normal operating range, no readout is provided. When an abnormal operating condition occurs, the readouts appear in the corresponding color. In reversionary mode, only the readouts are shown.
Figure 3-8 Oil Display (Normal Mode)
Fuel Displayisplay
The fuel display is located beneath the oil indicators and shows the fuel quantity in pounds (lb) and fuel flow in pounds per hour (pph) for each engine, the total fuel quantity, and the fuel tank temperature in °C. Fuel information is provided primarily by the Fuel Quantity Signal Conditioner (FQSC), which has a fuel quantity processor for each tank. Fuel display can also be configured for display in metric units.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Cessna Citation Mustang G1000 Integrated Flight Dec(37)