曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 Save RC data (for future loading) can be done from within Flight Simulator using the semi-colon key (;).
 AI interactions including:
o Ground traffic frozen to prevent runway incursions while you are on final.
o Chatter appropriate to their actions.
o Detecting AI planes that will cause a conflict.
o When you are on final, slow faster planes behind you, and speed up slower planes in front of you.
 Easy configuration of which Pilots/Copilots/Controllers voices you want to use on your flight.
 For non-FAA airports, you will specify the transition altitude and the transition level will be calculated based on the local pressure.
 Easier registration process.
 Debug option to create a log, which can be analyzed to see why something happened.
 International phraseology and procedures.
 Recorded center names, 109 of our favorite airports, and hundreds of aircraft names and carriers.
 Centers are now divided into sectors, resulting in more enroute frequency switches.
 Aircraft now identified by type of aircraft in traffic calls and during ground operations.
 More realistic ground operations, including “Follow the”, “Give way to the”, “Monitor tower”.
 Request that the initial descent clearance from cruise be a “pilot‟s discretion” clearance.
 New crossing restriction altitudes based on runway in use.
 Enroute holds can be always on (for practice), always off (for quick, uneventful flights), or based on current weather conditions at the arrival airport (most realistic).
 New Departure Procedure (DP) options – with altitude restrictions, or no altitude restrictions.
 MSA for airports in your flight plans, allows you to control the lowest altitude given by a controller.
 Option to have no speed restrictions below 10,000 at non-FAA controlled departure airports.
 Each center is classified as a FAA or ICAO center, resulting in different procedures and phraseology.
 Cleaner, more consistent downwind/base/intercept/final vectors.
 Ability to check for RC updates via the internet. New code and data can be downloaded and installed with the touch of a button.
Radar Contact Introduction
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 13
What is in Radar Contact - Feature List
 RC is a standalone program that runs concurrently with Flight Simulator. RC does NOT generate adventures.
 A new external user interface, a small window created by either FSUIPC or ShowText, in Flight Simulator provides a very friendly method for setting up and navigation of RC options and menus.
 You now have the ability to change destinations while enroute. Choose one of your two alternates, or select any airport in Flight Simulator.
 You can choose two alternate airports, which can be used after missed approaches.
 RC allows you to declare an emergency and have priority handling. You have the option to return to your departure airport, request vectors to the closest suitable airport, tell the controller which specific field you prefer, or continue on to your destination.
 RC uses real-world communication frequencies. You can also enter your own frequencies, or eliminate certain controllers.
 RC correctly handles airports without ground, tower, departure, approach controllers, or any combination of controllers.
 RC has the ability to provide pre-recorded chatter, and/or dynamically generated chatter as you wish.
 You can easily add your own pre-recorded chatter for a whole country, into specific center boundaries, into specific approach and departure spaces, and individual airports.
 RC provides dynamically generated chatter where no recorded chatter exists. You can also easily change from pre-recorded chatter to generated chatter.
 You can choose any of the following types of approaches:
o Visual
o ILS
o VOR, VOR-A, VOR-B
o DME-A, DME-B
o NDB
o GPS
o LOC
o LOC-BC
o RNAV
o SDF
o TACAN
 You can customize your VFR squawk code.
 Pressure readings are inches of mercury in the USA, millibars everywhere else.
 You can define transition level for departure and arrival locations.
 There is text display for the hearing-impaired.
 You will receive traffic advisories for AI Traffic, which is near your altitude and flight path.
 You can save your RC session and load it later. This feature also saves the FS state.
 You can abort takeoffs, if necessary.
 After missed approaches choose to hold as published, take holding vectors, re-enter the pattern, or go to your alternate airport.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Radar Contact(11)