曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Copyright JDT LLC 2005 Page 70
Right mouse click on the highlighted airport. This will bring up a menu to allow to you send the selected airport to the flight plan. Our first NAVAID waypoint along the route is Chicago Heights VOR. Do an ID search for CGT and send it over to the flight plan. Chicago Heights VOR is a Low Altitude VOR with a service volume of 40 nautical miles. At a charted distance of only 7.7 NM, this is well within the reception range. The next NAVAID along the route is Boiler VOR. Do an ID search for BVT and send it over to the flight plan.
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 71
Boiler VOR is a high altitude VOR. As mentioned earlier in this chapter, high altitude VORs have a service volume of 40 nautical miles radial distance from 1,000 to 14,500. At a cruise altitude of 5,000 feet for the flight, this would give us a maximum range between VORs of 80 nautical miles. At a charted distance of 61.6 nautical miles from CGT to BVT, planned distances fall within the reception limitations for selected NAVAIDs.
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 72
The last step in the plan is to insert Lafayette-Purdue University as the arrival airport as shown below.
By clicking on the “L” button on the right hand menu bar you can overlay low altitude “Victor” airways. This will allow you to verify that you have in fact planned your route along airway Victor 7.
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 73
Once the flight plan is built in FSNavigator to our satisfaction, we have the option to save it for future use. Click on Plan and Save As.
Planned routing along airway Victor 7
Planned routing along airway Victor 7
Click Plan
Click Save As
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 74
You may then specify a flight plan name. A suggestion would be to simply name the plan for the city pair that you are flying, such as 05C-KLAF. Once a file name is given to the flight plan, click Save. Now that the flight plan is saved, it must be exported for use by Radar Contact. Select Plan and Export.
Type 05C-KLAF
Click Save
Click Plan
Click Export
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 75
This will bring up a list of choices for flight plan export. Select the FS2002 option (NOT Radar Contact) and then click OK. Once you click OK, you will be given a choice as to which runway you would like. For the purposes of constructing the plan, either runway is fine so just highlight one you like and click OK. Now you see a window where you can save your plan file to the FS200x flight plan format for use by Radar Contact. Once again, simply saving the plan file as the city pair name is suggested but you may name it as you wish. FSNavigator will use the Myflts folder in the FS2002 directory structure as the default location, but you may specify any other folder you would prefer to use as long as you know where to find the file.
Click OK
FS2002 – NOT RADAR CONTACT
Click OK
Any runway is fine
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 76
The directory path is shown here. Note that your directory structure may differ if you have installed Flight Simulator in a non-standard location. IMPORTANT NOTE – Selecting FS2000 for the export option will yield the same results, but you will not have the extra step of selecting a runway, and FSNavigator will default to the pilots folder in the FS2000 directory when saving. Once you have saved your route in FS200x format with a .pln file extension, your flight plan is ready for immediate use by Radar Contact. Double-click the Radar Contact shortcut on the desktop. You will see the main screen as shown below.
Click Save
Type 05C-KLAF
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 77
To load your FS200x flight plan, click FS200x [*.pln].
Click FS200x (.pln) button
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 78
Once you click FS200x, the Open PLN File window will appear showing all of the available .PLN files. Your 05C-KLAF flight plan file will be listed. If you saved your plan file to another directory, you will have to browse to locate your file.
Select your .pln file and click Open.
Click Open
Select the .pln file
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 79
After you click Open, Radar Contact will load your flight plan information. Your city pairs, altitude, and other pertinent flight plan information will be displayed in the main RC window.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Radar Contact(33)