____ necessary. This disk must be prepared by the GSE Application Software (Ref. software vendor documentation).
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page A200 1 1 Aug 01/05 1 1 1CES 1

 (1)
 Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002)

 (2)
 Make sure that the disk is not write-protected.

 Subtask 31-36-00-865-097
 D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU CFDS/CFDIU/SPLY 2TW J18 121VU CFDS/CFDIU/BACK/UP 8TW J17 121VU DATA/LOADER/SPLY 3TD J16 121VU DLS&/DLRB/SPLY 5TD J15 121VU AIDS & RCDR/QAR 14TU K17 121VU AIDS & RCDR/FDIMU 5TV K15 121VU ENGINE/ENG1 AND 2/EVMU 1EV R44
 4. Procedure_________
 Subtask 31-36-00-710-082
 A. Dump Procedure to Download FDIMU Data (PDL)
 NOTE : This task is only applicable for data download via the PDL.
____
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the Portable Data Loader (PDL):
 -Set the ON/OFF switch to ON.
-Put the prepared disk into the PDL.
-Wait until the TRANSF COMPLETE indication comes on.
On the PDL display:
-The MDDU READY indication shows.
-These indications show in a shorttime: READY, WAIT RESPONSE, TRANSF IN PROG.
-The TRANSF COMPLETE indication showsafter correct download.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page A201 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-Push the EJECT button and  - The MDDU READY indication shows.
 remove the disk.

 -
Set the ON/OFF switch to OFF. Subtask 31-36-00-710-083

 B.
 Dump Procedure to Download FDIMU Data (MDDU)
 NOTE : This task is only applicable for data download via the MDDU.

____
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the overhead panel, on the Data Loading Selector 101TD:
 -Put the data loading selector ON/OFF switch to ON.
-
Push NEXT or PREV key until the ACMS NOT SELECTED indication shows on the display.

 -
Push the SEL CTL key.

2. On the Center Pedestal, on the MDDU:
 -Open the floppy disk access door.
 -Put the prepared disk into the MDDU.
On the Data Loading Selector display:
-
The DB/N:XXXXXXXX and PUSH NEXT/PREVindications show.

-
The ACMS NOT SELECTED indicationshows.

-
The ACMS SELECTED indication shows.

On the MDDU display:

-
The MDDU READY indication shows.

-These indications show in a shorttime: READY, WAIT RESPONSE, TRANSF IN PROG.
 NOTE : For some MDDU P/N the BUS-number and the file-sizes show between the
____ messages TRANSF IN PROG and TRANSF COMPLETE. The file-sizes decrease to zero during the data loading. This shows the progress of the data loading.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page A202 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
-Wait until the TRANSF COMPLETE  - The TRANSF COMPLETE indication shows indication comes on. after correct download.
 -Push the EJECT button and  - The MDDU READY indication shows.
 remove the disk.

 -Close the floppy disk access
 door.

 3. On the Data Loading Selector On the Data Loading Selector display:
 -Push the SEL CTL key.  - The AIDS NOT SELECTED indication
 shows.

 -Set the ON/OFF switch to OFF.
 5. Close-up
________ Subtask 31-36-00-860-096
 A. Put the System Back to the Serviceable Condition (PDL)
 NOTE : This task is only applicable for data download via the PDL.

____
 (1)
 De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002)

 (2)
 Disconnect the Adapter Cable from the FDIMU.

 (3)
 Disconnect the Adapter Cable from the PDL.

 (4)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 4(18)