(5)
Push the line key adjacent to the <QAR DATA indication.
-The AIDS: PCMCIA QAR STATUS shows.
(6)
Push the line key adjacent to the RETURN indication.
-The AIDS: PCMCIA MAIN MENU shows.
(7)
Push the line key adjacent to the <SAR DATA indication.
-The AIDS: PCMCIA SAR STATUS shows.
(8)
Push the line key adjacent to the RETURN indication.
-The AIDS: PCMCIA MAIN MENU shows.
(9)
Push the line key adjacent to the DAR DATA> indication.
-The AIDS: PCMCIA DAR STATUS shows.
(10)
Push the line key adjacent to the RETURN indication.
-The AIDS: PCMCIA MAIN MENU shows.
(11)
Push the line key adjacent to the REPORT DATA> indication.
-The AIDS: PCMCIA RPT STATUS shows.
(12)
On the MCDU push the MCDU Main Menu key.
-The MCDU Main Menu shows.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page A216 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 051-099, 106-149, 211-299, 301-399, 401-499,
Subtask 31-36-00-862-068
C. Aircraft Maintenance Configuration
(1) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R 1EFF : 051-099, 106-149, 211-299, 301-399, 1 31-36-00Page A217 1401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
TASK 31-36-00-710-005
Optical DAR Software Load Procedure
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 31-36-00-740-003 Test of the DAR (2TV) 52-41-00-010-002 Open the Avionics Compartment Doors for Access 52-41-00-410-002 Close the Avionics Compartment Doors after Access CMM 31-30-03
3. Job Set-up
__________
Subtask 31-36-00-861-062
A. Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-36-00Page A218 1401-499, 1Aug 01/05 1 1 1CES 1 Subtask 31-36-00-010-052
B. Get Access
(1) Put the access platform in position below the access door 824.
(2)
Open the access door 824. (Ref. TASK 52-41-00-010-002)
Subtask 31-36-00-865-064
C.
Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU RCDR/ACCLRM 9TU K18
R **ON A/C 106-149, 211-299, 301-399, 401-499,
121VU AIDS & RCDR/FDIMU 5TV K15 **ON A/C 151-199, 201-210,
121VU AIDS/DMU 4TV K15 R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
4. Procedure
_________
Subtask 31-36-00-710-060
A. Software Load Procedure
(1) Do the optical DAR Software Load Procedure (Ref. CMM 31-30-03).
5. Close-up
________
Subtask 31-36-00-862-062
A. De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-36-00Page A219 1401-499, 1Aug 01/05 1 1 1CES 1 Subtask 31-36-00-410-052
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access door 824. (Ref. TASK 52-41-00-410-002)
(3)
Remove the access platform(s). Subtask 31-36-00-710-057
C.
Do the operational test of the DAR (Ref. TASK 31-36-00-740-003).
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-36-00Page A220 1401-499, 1Aug 01/05 1 1 1CES 1
TASK 31-36-00-100-001 Optical DAR Drive Lens Cleaning Procedure
1.
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM 指示/記錄系統(tǒng) 4(22)
