B.
 Put the System Back to the Serviceable Condition (MDDU)
 NOTE : This task is only applicable for data download via the MDDU.

____
 (1) De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002)

R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page A203 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-36-00-410-068

 C. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the access door 824. (Ref. TASK 52-41-00-410-002)

 (3)
 Remove the access platform(s).

R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page A204 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 051-099,

R TASK 31-36-00-710-016 R Download of FDIMU/DMU Data on a PCMCIA Card R 1. Reason for the Job
__________________ R Self Explanatory R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific PCMCIA card
R No specific access platform 1.6 m (5 ft. 3 in.)

R B. Referenced Information

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 24-41-00-861-002 R R 24-41-00-862-002 R R 52-41-00-010-002 R 52-41-00-410-002
R 3. Job Set-up
__________
R Subtask 31-36-00-861-071 Energize the Aircraft Electrical Circuits from the External Power De-energize the Aircraft Electrical Circuits Supplied from the External Power Open the Avionics Compartment Doors for Access Close the Avionics Compartment Doors after Access
R A. Aircraft Maintenance Configuration
R (1) Energize the aircraft electrical circuits R (Ref. TASK 24-41-00-861-002).
R 1EFF : 051-099, 1 31-36-00Page A205 1 1 May 01/05 1 1 1CES 1

R  Subtask 31-36-00-010-071 
R  B. Get Access 
R  (1) Put the access platform in position at the access door 824 in zone 
R  128. 
R  (2) Open the access door 824. (Ref. TASK 52-41-00-010-002) 
R  Subtask 31-36-00-865-099 
R  C. Remove the safety clip(s) and the tag(s) and close this(these) circuit 
R  breaker(s): 
R  -------------------------------------------------------------------------------
R  PANEL DESIGNATION IDENT. LOCATION 
R  -------------------------------------------------------------------------------
R  121VU AIDS/DMU 4TV K15 
R  4. Procedure_________ 
R  Subtask 31-36-00-710-087 
R  A. Download of DMU Data on a PCMCIA Card 
R  NOTE : To download DMU data on a PCMCIA card, it is necessary to format____ 
R  the PCMCIA card. Speak to the vendor to get the configuration 
R  files necessary for the PCMCIA card. Or speak to the vendor to get 
R  the programming software (GSE) to format the PCMCIA card 
R  sufficient. 
R  (1) On the DMU 1TV open the flap to the PCMCIA interface and make sure 
R  that both LED's are off. 
R  (2) Put the PCMCIA card with the related configuration files into the 
R  interface until the card is flush with the EXIT pushbutton. 
R  NOTE : The green LED flashes while the loading process is in____ 
R  progress. If the loading process is good the green LED stays 
R  on. If the loading process is not good the green LED goes off 
R  and the amber LED comes on. 
R  (3) If the green LED stays on, push the EXIT button to remove the PCMCIA 
R  card. 
R  (4) Make sure that the green LED goes off. 

R 1EFF : 051-099, 1 31-36-00Page A206 1 1 May 01/05 1 1 1CES 1

R  5. Close-up________ 
R  Subtask 31-36-00-410-070 
R  A. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) Close the access door 824. (Ref. TASK 52-41-00-410-002) 
R  (3) Remove the access platform(s). 
R  Subtask 31-36-00-862-071 
R  B. Aircraft Maintenance Configuration 
R  (1) De-energize the aircraft electrical circuits 
R  (Ref. TASK 24-41-00-862-002). 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 4(19)