(2)
Close the access door 811. (Ref. TASK 52-41-00-410-002)
(3)
Remove the access platform(s).
1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-63-22Page 420 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 DISPLAY UNIT (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) - INSPECTION/CHECK
_______________________________________________________________
TASK 31-63-22-200-001
Measurement of the Display Unit Brightness
1. Reason for the Job
__________________
Refer to the MPD TASK: 316322-02
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
F1395993 1 CALIBRATED LUMINANCE METER
LS100 1 LUMINANCE METER
R LS110 1 TBD
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-008 Procedure to Get Access to the SYSTEM
REPORT/TEST/INST Page
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
31-63-22-991-002 Fig. 601
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-63-22Page 601 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
3. Job Set-up__________
Subtask 31-63-22-860-055
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(2) Do the EIS start procedure (Ref. TASK 31-60-00-860-001)
(3) On the center pedestal, on the SWITCHING panel 8VU: - make sure that the EIS DMC and ECAM/ND XFR selector switches are at NORM.
R R R R R R R (4) Use one of these luminance meters: - CALIBRATED LUMINANCE METER (F1395993) with lens 110, or - LUMINANCE METER (LS100) with lens 110 or - TBD (LS110) with lens 110
Subtask 31-63-22-865-055
B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU EIS/ECAM/CTL/PNL 15WT E12 49VU EIS/DMC1/SPLY 10WT1 E11 49VU EIS/DMC3/STBY/SPLY 14WT1 E10 49VU EIS/DMC1/SWTG 21WT1 E09 49VU EIS/DMC3/SWTG 21WT3 E07 49VU EIS/ECAM DU/UPPER/SWTG 24WT1 E06 49VU EIS/ECAM DU/UPPER/SPLY 13WT1 E05 49VU EIS/PFD CAPT/SWTG 22WT1 E04
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
R 49VU EIS/PFD CAPT/SPLY 11WT1 E03
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-63-22Page 602 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R 49VU EIS/ND CAPT/SWTG 23WT1 E02
R 49VU EIS/ND CAPT/SPLY 12WT1 E01
R 49VU SDAC/1/SPLY 3WV F04
R 49VU FWS/FWC1/SPLY 3WW F01
R 49VU LIGHTING/XFMR/115V.5V/ESS BUS 29LP H03
R **ON A/C 106-149, 303-399,
R 49VU EIS/PFD/CAPT/SPLY 11WT1 E03
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R 121VU EIS/DMC3/SPLY 10WT3 Q09
R 121VU EIS/DMC2/SPLY 10WT2 Q08
R 121VU EIS/FWC2/SPLY 2WW Q07
R 121VU EIS/SDAC/2/SPLY 2WV Q06
R 121VU EIS/ECAM DU/LOWER/SPLY 13WT2 R11
R 121VU EIS/ECAM DU/LOWER/SWTG 24WT2 R10
R 121VU EIS/DMC2/SWTG 21WT2 R08
R 121VU EIS/ND/F/O/SWTG 23WT2 R06
R 121VU EIS/PFD/F/O/SWTG 22WT2 R05
R 121VU EIS/ND/F/O 12WT2 R04
R 121VU EIS/PFD/F/O 11WT2 R03
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統(tǒng) 8(4)
